Newsfeed
Bradford Muse
wil dit item
wil dit item
P-39D/L, P-400 Airacobras 35th FS/8th FG & 35th FG
SuperScale International 1:48
48-1154 2005 Onbekende wijziging 14 July, 04:45
sc114
heeft een nieuw fotoalbum toegevoegd.
heeft een nieuw fotoalbum toegevoegd.
37 26 May, 21:39
Mr D
Soviet's had some great green paints, really distinctive, love it.
If it's Russian Aircraft...it's got to be Zvezda 👍👍👍
Soviet's had some great green paints, really distinctive, love it.
If it's Russian Aircraft...it's got to be Zvezda 👍👍👍
4 June, 21:54
Mr D
Really interesting subject, love Soviet era stuff, Zvezda do a really nice kit, great work so far, good colour matching 👍👍 be following.
Really interesting subject, love Soviet era stuff, Zvezda do a really nice kit, great work so far, good colour matching 👍👍 be following.
19 June, 20:33
sc114
Hello everyone! There is a lot of work and little time for hobbies, but the model is slowly coming together!
Hello everyone! There is a lot of work and little time for hobbies, but the model is slowly coming together!
19 June, 22:29
Nicolas
heeft een nieuw fotoalbum toegevoegd.
heeft een nieuw fotoalbum toegevoegd.
29 afbeeldingen
WIP: Eurocopter BK-117 "Space Design" D-HBKS 1:72
Some Styrenstrips & sheet and some aluminium tape.
Project: BK 117 "SPACE DESIGN"
12 24 June, 19:12
Nicolas
As soon as I finish one of my 3 current projects (2 of them ar nearly done) I will start with this little helicopter.
As soon as I finish one of my 3 current projects (2 of them ar nearly done) I will start with this little helicopter.
24 June, 19:17
Nicolas
As I am covid positive (fortunately only with very mild syntomas) I had some time to build again today. So far I am positively surprised by the accuracy of fit. There are no locator pins, but I can now click the fuselage and cockpit together and even the tail section holds without glue.
As I am covid positive (fortunately only with very mild syntomas) I had some time to build again today. So far I am positively surprised by the accuracy of fit. There are no locator pins, but I can now click the fuselage and cockpit together and even the tail section holds without glue.
8 July, 19:15
Nicolas
I would like to do some rivets on the exteriour, but I couldn't find some good drawings. If somebody has a hint I would be grateful.
I would like to do some rivets on the exteriour, but I couldn't find some good drawings. If somebody has a hint I would be grateful.
8 July, 19:56
Nicolas
Today I started installing the controls. Doing so I noticed, the collectiv controls are missinh in the kit. So I started scratchbuilding them after photos. Also fabricated and installed blinds for the paxes.
Today I started installing the controls. Doing so I noticed, the collectiv controls are missinh in the kit. So I started scratchbuilding them after photos. Also fabricated and installed blinds for the paxes.
9 July, 19:06
Shar Dipree
I have the same kit too. I'm really looking forward to your results. Following. 🙂
I have the same kit too. I'm really looking forward to your results. Following. 🙂
13 July, 05:27
Desert Marlin
heeft een nieuw fotoalbum toegevoegd.
heeft een nieuw fotoalbum toegevoegd.
51 afbeeldingen
Israeli P-51D D-191 (2302) [COMPLETED]1:32
A really pretty Scheme!
Project: P-51D Israeli D-191 (2302)
40 14 April, 21:47
Desert Marlin
Well, the polycap that is supposed to link/sync the left and right elevators fell out during the process of joining the fuselage halves. So I had to saw out the little housing that was supposed to hold the polycap in place and set it manually. Looks like I have one "unforced error" so far...
Well, the polycap that is supposed to link/sync the left and right elevators fell out during the process of joining the fuselage halves. So I had to saw out the little housing that was supposed to hold the polycap in place and set it manually. Looks like I have one "unforced error" so far...
26 April, 22:57
Rando
That Merlin is looking great. Looks like it came with the kit? Must be a lot easier than old resin, lol
That Merlin is looking great. Looks like it came with the kit? Must be a lot easier than old resin, lol
27 April, 00:09
Desert Marlin
It's close to time to add the canopy and mask for paint. Lots of weathering yet to go. And the gun bays are looking a bit bland. Needs some additional paint and wiring.
It's close to time to add the canopy and mask for paint. Lots of weathering yet to go. And the gun bays are looking a bit bland. Needs some additional paint and wiring.
1 May, 06:15
Desert Marlin
Time to close up the cockpit and prep for paint. Going to be one of those traditional natural metal schemes with lots of wear and tear...
Time to close up the cockpit and prep for paint. Going to be one of those traditional natural metal schemes with lots of wear and tear...
3 May, 05:06
Rando
Yep agreed Ky, my next P-51 will definitely be a Tamiya. How did detailing the gun bays go Marlin?
Yep agreed Ky, my next P-51 will definitely be a Tamiya. How did detailing the gun bays go Marlin?
3 May, 14:37
Desert Marlin
Still working on them. The fit has had only one issue that was even close to being worth mentioning. The right wing gun port on the leading edge did not fit perfectly. So I have had to do a little filling on the undersurface. The underwing scoop was almost an issue but seems to have settled into place. WARNING: one must fit the AILERONS BEFORE THE FLAPS. Otherwise the photo etched hinge does not get locked into place by the steel shaft from the outboard end of the flap. Missed this so it was unforced error #2...
Still working on them. The fit has had only one issue that was even close to being worth mentioning. The right wing gun port on the leading edge did not fit perfectly. So I have had to do a little filling on the undersurface. The underwing scoop was almost an issue but seems to have settled into place. WARNING: one must fit the AILERONS BEFORE THE FLAPS. Otherwise the photo etched hinge does not get locked into place by the steel shaft from the outboard end of the flap. Missed this so it was unforced error #2...
3 May, 20:53
Desert Marlin
Okay, after looking at some of the real aircraft, I am not sure there is any detail needed except to weather the bay and guns. I was expecting some electrical or other pipes/wiring, but alas, there does not appear to be any...
Okay, after looking at some of the real aircraft, I am not sure there is any detail needed except to weather the bay and guns. I was expecting some electrical or other pipes/wiring, but alas, there does not appear to be any...
3 May, 21:41
Desert Marlin
I'm back! So the masks provided are intended to be applied to the outside surface. However, it's really hard to mask the interior surface, so I cut the masks and applied them to the inside of the glass and then used Scotch tape for the outside. Leaving the interior a little "over masked, the black primer added to the outside with the flat black interior will create a nice effect overall.
I'm back! So the masks provided are intended to be applied to the outside surface. However, it's really hard to mask the interior surface, so I cut the masks and applied them to the inside of the glass and then used Scotch tape for the outside. Leaving the interior a little "over masked, the black primer added to the outside with the flat black interior will create a nice effect overall.
2 June, 23:44
Desert Marlin
Back at it! Prop is done, not yet weathered. Needs some scuffing along the leading edges.
Back at it! Prop is done, not yet weathered. Needs some scuffing along the leading edges.
1 July, 04:14
Desert Marlin
I'm using Alclad and Metalizer. Sadly, my collection of Metalizer is shrinking. My choice for masking tape is 3M PostIt Notes. They work really well on the soft surface of Alclad Primers and Paints. Looking to seal it up next and start the process of marking/weathering.
I'm using Alclad and Metalizer. Sadly, my collection of Metalizer is shrinking. My choice for masking tape is 3M PostIt Notes. They work really well on the soft surface of Alclad Primers and Paints. Looking to seal it up next and start the process of marking/weathering.
4 July, 17:04
John
I love the finish of Metalizer but hoo boy is it fragile. I hear you on supply. I'm all out of aluminum; stainless steel and jet exhaust are all that's left. 🙁
Your IDF Mustang is looking great, however!
I love the finish of Metalizer but hoo boy is it fragile. I hear you on supply. I'm all out of aluminum; stainless steel and jet exhaust are all that's left. 🙁
Your IDF Mustang is looking great, however!
4 July, 18:02
CaptGPF
Going to steal your post it notes trick for my next metallic project. Even i]with Xtreme Netal paints, I still have to wait a couple of days after I seal it with gloss - thanks Marlin!
Going to steal your post it notes trick for my next metallic project. Even i]with Xtreme Netal paints, I still have to wait a couple of days after I seal it with gloss - thanks Marlin!
5 July, 15:40
French camp 78
is eigenaar van dit item
is eigenaar van dit item
F-16D block 50 3D-Printed & coloured Interior on decal paper
Quinta Studio 1:48
QD48408 14 July, 04:18
French camp 78
is eigenaar van dit item
is eigenaar van dit item
McDonnell Douglas
F-4 Phantom II - FOD Covers for Zoukei-Mura ResKit 1:48
RSU48-0207 2023 Nieuwe mallen 14 July, 04:17
/nl/search.php?q=*&page=newsfeed&fkSECTION[]=Newsfeed
search-solr.php?lang=nl
35
35
/nl/search.php?q=*&page=newsfeed&fkSECTION[]=Newsfeed
35
todo