A-6 "Intruder" , EA-6 "Prowler" wheels set

ResKit | No. RS32-0001 | 1:32

Fapte

Marca:: ResKit
Titlu:: A-6 "Intruder" , EA-6 "Prowler" wheels set
Număr:: RS32-0001
Scară:: 1:32
Tip:: Set detaliat
Eliberată:: 2020 Instrumentul nou
Cod de bare:: 4589913295353 (EAN)
Subiect:: Grumman A-6 Intruder » jeturi (avioane)

Proiectat pentru

Acest set de aftermarket este destinat pentru:

Trumpeter

2013

2014

Instrumentul nou

Piese noi

Piata de desfacere

Magazine online

USD 15.50Disponibil »

USD 17.24

Stoc epuizat »

€ 12.42

USD 14.23Stoc epuizat »

¥ 1836

USD 15.24Stoc epuizat »

SKU-uri alternative pentru ResKit RS32-0001:
RS320001 | 32-0001 | RES-RS32-0001 | RESRS320001

Notă: Prețurile și disponibilitatea sunt numai indicații. De asemenea, verificați dacă produsul se potrivește cu adevărat!

In-box recenzii

Recenzii externe

Nu știm despre niciun comentariu în cutie pentru acest lucru A-6 "Intruder" , EA-6 "Prowler" wheels set (#RS32-0001) din ResKit.

Comentarii

Jon Somerville
The holes for the wheels do not line up for the only kit in 1/32. My guess is that these are accurate to the real thing and not designed to fit the kit. So which do you prefer? I would have liked to see if fit the kit. Used drill bits to match a fitting hole to the original wheel parts and then drilled out the resin. The cut line to remove the casting block for the front wheels are correct, but not the mains.

All comments (10) » 1 19 April 2021, 15:43

Jon Somerville
I bought the MERs from ResKit. That was the one thing I was glad about that I waited so long before finishing the kit. Toyed with the idea of fixing the tail comb myself, but was going to be too much work for only a little gain.
Other issues with the kit is where the aft side of where the nose gear joins the fuselage is way to deep into the gear bay. The wing fences are not in the correct spot and the fuselage has way too many rivets. I filled the rivets where needed. If they ghost a bit, that's okay too.

19 December 2023, 13:44

Jon Somerville
Now that I re-read the last line in the review should really be "The cut line to remove the casting block for the front wheels hubs is correct, but not the mains." So referring to the hubs not the wheels themselves.

25 January, 17:38

Material de referinta

Grumman A-6 Intruder (Phoenix Scale Publications 18)

Grumman A-6 Intruder Airmark in Profile & Scale

Modellers Airguide No. 18

Andy Evans

2024

A-6 Intruder In U. S. Marine Corps Service and Navy Test & Evaluation Squ...

Colors & Markings Series No. 7

Rock Roszak, Mike Heideman

2023

Toate cărțile » (28 in total) Toate miscarile » (15 in total)