Newsfeed-

Rui S
I'm in. Great figure painting 👍

CaptGPF
I agree with Rui - you've nailed the tank, but the figure painting is even more impressive!

Kim Branders
Chipping proces in progress......

Matt
amazing work on the figures and the chipping and paintwork are also fantastic

gorby
Incredible figure painting!

Marius
Followin another one of your beautiful works.

Ken Kolenovsky
Incredible painting on this diorama. I absolutely love the modulation on the tank. Quick question: are you still perfecting the rubble? The reason I ask is that all the bricks are pristine. They distract from the excellent tank work you have done. IMHO some bricks should be broken to achieve the "destroyed building" look. Sorry if I have offended in any way with this comment but I am really looking forward to the finished production!

Kim Branders
Thanks ken, good remake about the bricks. They are already glued to the base but I will see what I can do 😉

Michael Razz
Hey Kim, U werk gaat er echt op vooruit knap gedaan met die modder onderaan.

Kim Branders
Thanks Razzie 🙂

Mr James
Lovely work. Beautiful figure painting excellent 152.

Rui S
Great figure painting & Dio, indeed 👍

Doubtingmango
Agree with everyone above! Great dio, and the vehicle and figures would be fantastic as stand alones. Where did you get the figuree? I love the story there!

Kim Branders
Thanks Doubtingmango, The figures are from Stalinggrad and Evolution.

Kim Branders
Adding a little bit more details between the bricks.

Olivier
I like this one. And as some fellow members pointed out, the figures do stand out.

Guy Rump
Looking great, following. 👍

Nicolas
Following

yngvenett
I'm following this to learn

Martin Oostrom
Another tutorial one needs to watch

Gerald Sigmund
@mks: Komakais Walkaround shows meshes for the left and right intakes and none for the center one.

Bozzer
I have no idea of your subject, but I do enjoy your builds. The tutorial is always a lesson, and very informative. Keep them coming 👍

Pepe
Looking

berni
I take a seat 👍

DerMattes
Watching 👍

Johne 69
I am in too 😃

Ben M
When you thin parts, what technique do you use?

MS K
@Ben M - When I need to shave a lot, like this time, I use file.

Michael Kohl
Martin and Bozzer pointed it out. This will be fun and informative to follow.

Matteo Pescarin
Oh wow, as usual, fantastic documentation of the efforts going into this project. Chapeau to you!
Nonetheless, it makes me want to skip any Revell kit from now on... if I only didn't have any in my stash XD

MS K
@Matteo - The new mold products produced since around 2010 are generally nice quality(2CV, VW T1, 911G, Etc...) , but this product is so poorly made that it is ridiculous. I don't know what the production concept of this kit is. It is poor for a precision model, and it's not even easy to assemble.

Michael Kohl
With Revell you better check in advance how that specific kit is rated by others. They have tons of reboxes and quite a few kits where you just wanna ask: are you serious? But then, once in a while, just to show that they are able - in general - to be a serious modelling company, they release some really fine stuff. Doesn't hurt to be prepared what you're up against.

Alexander Grivonev
A true Revell car kit experience 👍 The casted on wiper is especially painful

Michael Kohl
That diffusor is a tremendous improvement.

amazon.com/dp/B00004..aps%2C163&sr=8-3
Such a tool makes such work as fitting the diffusor panels to the chassis much easier (the thinner the needles/pins, the more precise the contour).
Just a german site to give an idea.
Cheers Michael

MS K
Nice idea. I wish there was something made of insect pins thin enough to use in a plamodel.

Johne 69
Great work so far 👍

berni
A question. What Colours you would use at this kit?

MS K
@berni - The red is Italian Red, and I plan to use Cobalt Blue + Sky Blue (the instructions say to mix Ultramarine and Blue).

Spanjaard
wow, your attention to detail and how detail your build logs are, never disappoint! amazing

George Williams
That interior looks really good.

Kesa Tiho
This album is a perfect way to round up why revells models are subpar, why modeling is a great hobby and the lengths humans will go to to achieve perfection. Great progress my guy.

MS K
The results of the steering-enabled modification are as follows: Youtube Video

Bozzer
There's nothing better than catching up on your builds, on a Sunday morning. It always lifts me and gives me the energy to get into the cave and get some building done. Excellent work on the steering! And those little bearings used as rivets, is excellent 👍

Thorsten Höse
Awesome-sauce! 😎

Sy Bar
🍿👍

yngvenett
Well done 👏 👏 Good solutions as for the fuel filler cap and lots of other details. Enjoyed the trip 👍

Nicolas
Great result. 👍

MS K
Thanks everyone. 😄

Christian W
Your detailwork is fantastic! Always a pleasure to read and see the details you're looking at and how you get it solved.

btw: I love your picture 158.

Alexander Grivonev
Great detailed report MS K! Bravo 👍

Martin Oostrom
Stunning work again

Marcel
Fantastic result and interesting to learn from as well. Good job 👏

Robert Podkoński
Taking a seat! 😉

Moreno Baruffini
Wow! I wasn't aware of this plane. Following with a lot of interest!

Łukasz Gliński
Welcome mates.
Me neither, until I visited the Duebendorf museum 🙂

Patryk S.
Following! Very interresting project!

Michael Kohl
Is Duebendorf worth a visit?

Moreno Baruffini
I'm also curious about Dübendorf, now the Alptransit tunnel is closed, but It should be a nice trip from southern Alps

Łukasz Gliński
Well, I visited Dübendorf only once, more than a decade ago. Not that the Switzerland changes very quickly, but it was a while ago 😉
Not the biggest one I've been to (don't expect the size of Duxford), but very interesting. As it's in CH, there are many unique airplanes on display, so highly recommended.
The C36 was unfortunately parked the way you couldn't see the interior v.well, so there's a lot of guesswork involved in this build. Kora's kit has the same interior setup for all C36 versions which is not true for sure.

Cuajete
Interesting!

Łukasz Gliński
Welcome amigo 👍 I had to use some brute force today, but the fuselage has been closed

Edward MacKenzie
Well, it's time for me to take a seat here too, especially because i have this kit in my stash and live 10 minutes from Duebendorf 😉

Moreno Baruffini
...At the end of the day, I've also bought this kit! Great progress 👍

Bernd Grün
Promising start, Lukasz. Following! 👍

Cuajete
Looking good so far, Łukasz. Go on!

Łukasz Gliński
Thanks a lot, it's sort of on hold currently, as I prefer sanding the resin kits outdoors 🙂

Nicolas
Joining in

Guy Rump
Looking good, following. 👍

Cuajete
I agree with you, Łukasz 👍
Despite this, it is advisable to use a mask or you can even sand inside a bag if you do not do it outdoors. Resin dust is toxic and can be carcinogenic.

Michael Kohl
Consider wet sanding. It ameliorates the dust problem considerably. Not using a dust mask when dry sanding resin isn't the most brilliant idea - being it in- or outside.

Łukasz Gliński
Just to be clear, inside or putside - mask is always there, I just skip cleaning the residue from the modelling room 👍

Bernd Grün
Nice start, Lukasz! 👍 Following!

Moreno Baruffini
Already summer in Poland Łukasz? 😉 What do you use as filler?

Łukasz Gliński
CA glue and some fancy sand from Revell Fix kit. Still, lots of sanding ahead

Cuajete
Great, Łukasz! Summer makes you even stronger 💪

Thomas Kolb
Cool project although I missed the first part! I am reserving my seat.

Łukasz Gliński
Welcome Thomas, great to see you here. I advanced a bit lately and managed to force the canopy into submission (just in case you wondered - there are 2 pieces in the kit)

Ben M
I've had the same issue with vacu canopies. Each one has gotten a little better for me.

Moreno Baruffini
Glad to see you again working on this Łukasz!

Zbynek Honzik
Taking a seat, Łukasz! This project looks very interesting.

Cuajete
Good progress!

Łukasz Gliński
Gruezi my friends 👍

Thomas Bischoff
time to join the show 👍

Alec K
Same. The canopy looks great 👍

Mirko Römer
Great work so far!

Alexander Grivonev
Never ever heard of this airplane 👍

Łukasz Gliński
Welcome folks, progress is slow, but I hope to start painting soon (this year at least)

Juergen Klinglhuber
Checkin' this out,...

Łukasz Gliński
Welcome JK 👍
After priming I found out a lot of bubbles in the resin, in particular on the fuselage - trying to locate and fill'em all.

Cuajete
I'm glad to see this project being resumed, Łukasz.
If you can't get rid of any bubbles, you can say they are bullet holes or pellet holes 😛

Moreno Baruffini
Ahahaha, I agree with Cuajete!