Newsfeed-

Bob Hall
Pretty cool there, P ! Guess I need to get cracking on one of mine. Just got done with a CHP Bronco, and I think one of these would look good sitting next to it. 👍

Curtis Caden
Bob Hall this was a model kit that I would recommend. At least it is only a 3-year-old model car! I did the double white doors because I was thinking of doing a Wisconsin State Highway Patrol. To do this properly for C H P one should only have one white door and a white roof. I keep looking for interesting variations IRL (in the real world), but then can't find the decals or accessories I want. I hadn't thought about doing a Bronco and instead did a 1996 Ford Explorer. If they ever do a good late model SUV, I wouldn't hesitate to make it a police/pursuit car. Happy modeling to you!

Bob Hall
I'm a Texas State Trooper and our cars are White over the top, with black. I have 5 in the stash and their earmarked for projects. And if you are looking for police car parts and goodies, let me know and I can help point ya in the right direction for parts. Police cars are my specialty !

springfieldm14

Martin Oostrom
Nice one Curtis

Curtis Caden
Bob Hall I am interested in new resources besides blackdogdiecast.com/ and https://ebay.com/. I was recently intrigued by the wraparound push bars. My last two models I added some old-style push bars with sirens. Thank you for your comments.
Thank you Martin Oostrom for your compliment.

gorby
Very nice job!

Thomas Bischoff
nice job - I watch the show 👍

David Taylor
Watching.

Christoph Kunz
Amazing build 👍

CaptGPF
Wow! Watching!

Desert Marlin
Same here! This looks really good!

Vincent
Amazing detail and great work on the cockpit. I will be following this build!

J35J
Great progress!👍🏻

gorby
Looks an interesting project.

Guy Rump
Looking good, following. 👍

Doubtingmango
Really nice camo

gorby
Very nice work!

Steven Van Dyck
The frame is constructed in the first building step. It's a bit complicated to analyse, but you have to get through this to get all the components ready to fit between the profiles.

Lenny Li
Looks fun with all those PE sheets!

Neuling
Looking forward here ..........

Steven Van Dyck
All welcome, I now assembled the front and 4th axles. All are movable in a steering position, but as usual you have to decide and then fix everything. Also I found that one set of wheels is not parallel, so I cut the steering arm and added a millimeter of sprue roundel. Does this not appear if they test-fit these kits, or did I make a build error?

Steven Van Dyck
All 4 axles are now added to the frame, together with the shock absorbers that I had to shorten a bit at the front axle. The torsion bars are fixed at one side so I can remove the air bellows for painting.

Steven Van Dyck
The fuel tank hoops and steps are now replaced with PE. The steps are quite hard to bend in the right order and no dimensions or angles are given to mount them.

Steven Van Dyck
The radiator is now detailed with the Voyager silver mesh. You only see the front side now, it's on both sides. When it was assembled I realised that the air horns also need a PE part. There is some warping in the sump and the top cover, I hope it isn't evident looking through the front grille later on. The air tanks must be stripped like the fuel tanks, but you get equal lengths of PE strips to attach two kinds of tank. Therefore I clipped 4 of them and redrilled the hole on the end. The assembly with the 2 tanks and the container is suspended on a single PE part that I had first bent the wrong direction, I hope it doesn't get fatigued.

Steven Van Dyck
I started the interior with some colored PE from Eduard. The Black Dog figures are assembled and also a Maim figure and two Legend armament sets were added to the project. But the Maim gunner appeared to have a large backpack, so I don't know he's feasible.

Steven Van Dyck
Continuing the interior with the seats. Also the fenders are completed, it's very important to align the bent beams that sometimes are replaced woth Voyager assemblies. It's preferable to use that, the replacements are sturdier than the originals.

Steven Van Dyck
The cabin exterior is done using some original kit PE and clearparts, but both have problems. The clearparts are not calibrated and have distortion because of this. I will be replacing the large parts with plexiglass. The kit PE is wobbly because it's not thick enough., I even had to hammer it quite a while. Then I found out Voyager does replace half of the protection kit, but not the large parts behind the doors. At least half of the creases are removed then. But Voyager messed up at the hood closing strip, providing two identical parts in stead of mirrored ones. This could be remedied with some re-riveting.

Steven Van Dyck
The pVoyager photo etch cabin roof is constructed with all its nightmarish embossing deformities corrected, the badly fitting airco module that was mosly bent the wrong way around so it broke at one instance. I replaced the 3 largest clearparts with a piece of Trumpeter 1/350 airplane set transparent box cover, that has the right thickness to be able to sand the corner roundings in it. The air purifier system is not installed completely, because that would impede the clearpart masking. So now it's down to interior painting.

gorby
Looks amazing so far!
I'm also amazed at the number of projects you have on the go and still manage to achieve such remarkable results.

Rui S
Looking forward to see you correct this one 👍

Maciej T.
One note: the model will not be in German paint. I will make it as a vehicle captured by the People's Army of Poland (1945). Therefore, the interior will be relatively empty - after all, Polish soldiers did not use schmeissers 🙂

Doubtingmango
Interior looks great

gorby
Looks great.

John
Heck yeah, nice Spit! Great paintjob.

Felix
Dear John, thanks a lot for your kind words! Much appreciated!

Neuling
Very appealing paintwork and chipping 👍

Felix
Merci beaucoup, Neuling! The chipping was fun, first time i did it!

gorby
I agree, excellent painting.

gorby
Nice work.