Newsfeed-

S B
Please tell me it's the Ghost-Aggressor! 😍

Hannes
That looks sooo good! The maus is such a bland tank and you detailed it up very nice!

Marc .
Thanks.

sebfischer
Love it, hope its ok to be inspired by your build for my next one 🙂

Marc .
Of course it's okay. I'm already looking forward to your build!

Mathias Griesbeck
very nice! reminds me of a WoT skin for the Maus.

Mathias Griesbeck
oh, after checking again: you did a damn good replica of the Landkreuzer skin 🙂

Ekki
Very nice result!

Cristian A
Thank you Ekki, this is a kit I've built 20 years ago, but luckily still remained in good shape until this day 🙂

Harald Besold
Starts promising! Nice details. 👍

Harry Eder
Great start! I´ll take a seat 🙂

Daniel Mysak
Nice start👍. Looking forward to your build. I´am curious to see the pros and cons of the kit.

Alec K
What! No rotor blades? 😂. I am in, nice detailing as always 👍

Hajo Lippke
Great, another Ronan-project!

Oleg Bogolei
I didn't dare to cut main weels bays, I just swore loudly at Trumpeter)
And there are some other remakes need to be done to make "A' from this model...

Maciej Bellos
I am in too. Source of inspiration this build will be 😄

Łukasz Gliński
Been waiting for this 👍

Patrick Hagelstein
Oh yes! A combo of Ronan and Intruder: obligatory to follow! 🙂

Ronan
Many thanks , mates 😉
For those who wish to assemble this model, it will be necessary to plan a little surgery on the main landing gear bays.
Other than that, I will say that the kit is better than Italeri or Fujimi but that's just my opinion. The level of detail is much higher than the other two

Ronan
Maybe a little more information about the different versions of A-6 :
tailspintopics.blogs..-vs-6e-intruder.html

Sergej I
AWESOME! 👍

Maciej Bellos
Oh WOW!

Juergen Klinglhuber
Jaw dropping detailing -as usally! All looks so easy and still perfectly clean and we all know how hard this is (especially in 72) - great job!

Ronan
Many thanks,
For the moment, I don't find any difficulty in building this kit.
I only used putty in the air intakes, the fitting is quite good

Skyhiker
Another straight out of the box build I see. 😉

Bas Tonn
Great, can't wait for more pics

Ronan
Many thanks,
The build keeps on quietly 😉

Alec K
Nice progress, the cockpit looks amazing 👍

Ronan
Thanks Alek 😉

Dearest readers,
For those who would like to build this model but are not happy about having to open the gear hatches, you should know that these famous hatches can be closed on the ground. Yesterday, I found a photo which attests to the thing in the book "lock on" by Verlinden. These hatches are closed manually by the ground mechanics during a prolonged stop of the plane, a sort of storage, this avoids FOD. Of course, this is very rare, but nevertheless it is possible. Also, it's up to you 😉

Oliver Zwiener
Take a seat

Patrick Hagelstein
Thanks for the encouragement Ronan! Let's have a look at references then. ☺️👍🏼

Michael Kohl
Following

Alec K
It's looking excellent 👍

Eric Duval
Joli travail 🙂

Ronan
Merci camarade 😊

Ronan
😉

Skyhiker
These planes always remind me of giant bugs for some reason.

Ronan
I think it looks like a tapdole 😉

Bernd Grün
Nice progress, Ronan! 👌 Looking for the final result.

Ronan
Thanks Bernd, i hope to finish it very soon 😉

Skyhiker
A tadpole I can see. But at least it's not a FROG or you would have your work cut out for you. 😉

Micky
Love the Intruder Ronan. Nice cockpit and build so far!!

Palo M
Beautiful work so far, especially love the paint scheme with tan nose - that's what I'd like to build as well. I found some pictures with the "NE" on tail in the same paint scheme, so hope to avoid aftermarket decals. Just got the same kit, so have to follow this thread 🙂

Is the "Hobbyboss" in the album title a joke or a mistake?

Ronan
Of course , it is a mistake : the correct title should be trumpeter 😉

Ronan
although Hobbyboss and Trumpeter are the same company ...

Roland Sachsenhofer
With these pictures I open the book report on Roden's Junkers D.1: I tried to extend the interior with some steel wire, the seat belts are from Eduard. For the detailing I downloaded the very interesting building instructions from Wingnut Wings for the large D.1 in 1:32, which is quite helpful if you want to have a good documentation as a basis for detailing. I'm also going to realise one of the WW variants, which I immediately liked: all in Dural/ NMF with only a minimal set of markings.

gorby
Nice work so far. Looking forward to this. 🙂

Michael Kohl
Auch da bin ich dabei.

Roland Sachsenhofer
I'm very pleased - appreciated!

bughunter
Watching!
I have done the short fuselage already, I hope one day I can do the long one too.

Is the engine painting finished? I can recommend the WNW manual for this, still available on WNW page.

Roland Sachsenhofer
Thanks for the tip - it's definitely a good one! The printed WNW instructions are next to me, so I want to use a little oily black on the top of the engine and add a little "brass"... But not only WNW instructions, also your excellent work is my reference.

Villiers de Vos
Very nice progress.

Roland Sachsenhofer
Thank you for your words, appreciated!

Roland Sachsenhofer
The fuselage of the D.1 is now closed, the only thing to be careful of was not to damage the corrugated sheet metal joints. A related issue arises with the leading edges of the wings: in my opinion, the prototype shows a continuous line around the leading edge.... this will be difficult to depict: I will try to get close to this with careful sanding and the same amount of reworking with a scalpel.

Roland Sachsenhofer
Now it worked with the upload of the pictures!

István Szücs
My favourite plane from the Great War-era, I'm watching!

bughunter
Yes to clean the wing seem is not that esay. I must admit I used also wings from another kit after I was not happy with the first try. I have both the long and short fuselage kits and the wings are the identical. But that shifts the problem only to a later date, when I will build the long one. A new Part PE set is waiting too 🙂

Roland Sachsenhofer
Thank you for your words, mates! - I completely agree that this is not an easy topic! My approach, which you can see started here, is to work on the front edge of the profile with a triangular file. I didn't even try to bring the corrugated sheet metal runs of the top and bottom together - that would be far too small for me - but simply used the file edge many times.... Well, in my opinion it looks at least a little better now than before, so I'll try to make it a little more precise....

Roland Sachsenhofer
The Alclad metal colours mercilessly bring out all the flaws and imperfections, especially when everything has already been trimmed to a high gloss in preparation for applying the decals like here! The Wingnut Wings instructions describe an effect called 'tiger stripes' on the wing sheeting, which I recreated using various aluminium and dural colours.

Robert Podkoński
A little late, but joining the party!

bughunter
The stripes are great - can be noticed, but both shades still looks like aluminium which it was.

Christian Abraham
Great build so far

Roland Sachsenhofer
Thank you very much, mates!
The opinion on the 'tiger stripes' really really pleases me in a very motivating way!

Guy Rump
Following. 👍

David Taylor
Watching.

Roland Sachsenhofer
That is appreciated as well! 🙂

Villiers de Vos
Very nice detailed work.

Roland Sachsenhofer
Thank you for your comment!

Ludvík Kružík
Roland, your model looks very good. I really like the interior of the plane and the engine. Also your rendition of the corrugated sheet metal looks very realistic. 👍

Roland Sachsenhofer
Ludvik, thank you for this comment, giving me a push to get the finishing steps done!

Dietmar Bogatzki
Wieder ein Meisterwerk von Roland 👍 hau rein 😉

Roland Sachsenhofer
Ich sage herzlich dank für den ermutigenden Kommentar! 🙂

Roland Sachsenhofer
A few steps closer to a finish: working with Roden decals is always an adventure, happy end not guaranteed! The whole thing is spiced up by the corrugated metal nature.... Well, this is the result; I will of touch up up the unclean parts with a brush, but on the whole it will stay like this - now for the signs of use and wear!

bughunter
Brave, brave - with good results 👍
I hadn't even tried those.

Roland Sachsenhofer
Thank you! 🙂
The Junkers D.1 is slowly approaching its final appearance - and that didn't work out quite as well as I had imagined! But what the heck, there are some nice things, like the turnbuckles or the two MGs from Gespatch; I'm also happy with the solution for the typical Junkers handles and footrests: a thin, glued-on metal rod was covered with finely cut Tamiya tape as a ridge. Well. I am satisfied with this overall impression.