Newsfeed-

Robert Podkoński
Taking a seat here.

Sy Bar
I love seeing the old kits with their moulded in markings, a sign of the times.
🍿

J35J
Also grabbing a seat, old kits are always of intrest👍🏻

Finn
Cool project, following

John Thomas
Cool project

DerMattes
How old are these? Never saw markings as raised details. Taking a seat 🙂

Will Dossel
F7U is a relatively recent reissue (2018?) but the A3D is 1956 - and yes, the decals are toast…

Maciej Bellos
Grabbing a seat!

Ludvík Kružík
I still miss this small helicopter in my collection of flying machines used in Czechoslovakia. The time has come for me to rectify that. 😉

Villiers de Vos
I will follow along.

Ludvík Kružík
Welcome Villiers! 🙂

Greg Baker
Oh. I built a 1/72 version of the Mi-1M... This should be interesting.

Ludvík Kružík
Hello, Greg. I know there's a Mi-1M kit in 1/72nd scale. Unfortunately, only this and a rather old kit from Special Hobby exists in 1/48 scale. In addition, this kit is an older version of the Mi-1A, which is different from the upgraded version of the Mi-1M. It has a different nose shape, different cockpit glazing and other minor changes. And since I decided to build the upgraded version of the Mi-1M, I will not avoid modifications to the kit.
To give you a better idea of the extent of the modifications to the kit, I've included a picture with the differences between the Mi-1A and Mi-1M versions color coded.

Greg Baker
Oh, neat! I didn't realize there were so many changes between the versions. This is going to look great!

Ludvík Kružík
Greg, thank you for your support.
____________________
I started building the model by making new transparent parts.

Alec K
Taking a seat, this brings back memories of ABC magazine 😜👍

gorby
Nice work moulding the new transparent parts.

Greg Baker
Yeah. Nice work on the heat-n-smash moulding for the clear parts. That can be tricky to do.

Ludvík Kružík
@Alec K
I used to buy ABC magazine regularly as a kid and eagerly awaited each new issue 🙂. I assume your mention of ABC magazine refers to the occasional modeling tutorial section.

@gorby, @Greg Baker
It's not too difficult to make new transparent parts by stretching warmed transparent foil over a pre-made template. Preparing the template is the most work. Stretching the warmed foil onto the template is just a routine that anyone can do after a few attempts.

Alec K
Correct 🙂👍👍

Robert Podkoński
How have I missed this? Taking a seat for sure! 🙂

Ludvík Kružík
Hello, Robert! Good to see you here. You haven't missed much so far. Up to this point I've been more concerned with preparation than building the model.

Ludvík Kružík
I want to try to use the sandwich construction in the production of new glass parts for the coptics. So I made (using the same process as the transparent parts) parts out of white plastic sheeting. These parts will have holes cut out for the windows. The transparent part will then be inserted between these two parts. The white outer and inner parts will form the embossed framing of the transparent part.

Jennifer Franklin
That looks great (as per usual 😛)

Ludvík Kružík
Welcome, Jennifer, we're glad to have you on board and thank you for your goodwill. 🙂

Ludvík Kružík
I came back from vacation and it started to rain. Ideal conditions for modelling. 🙂

So I'm back and continuing to work on the model. I need to glue the finished nose to the glued fuselage so the cockpit overlay fits exactly. That determines the workflow. First I have to finish the nose and the inside of the fuselage and glue all the parts that need to be glued to the fuselage halves from the inside. After gluing the fuselage halves together, I would no longer be able to get to these parts (or only with great difficulty).

Photos of the work progress will be coming soon.

Alexander Grivonev
Oh some modeling for big boys, not glueing perfectly fitting parts together and throwing on some paint! Following 👍

Ludvík Kružík
Welcome, Alexander! 🙂

Ludvík Kružík
I glued several parts to both halves of the fuselage. These parts are glued from the inside, so they have to be glued before the fuselage is closed.
I also started working on making new parts for the cockpit.

Bas Tonn
I'll take a seat. Big fan of this helicopter and its variants.

Finn
Following

Nicolas
Following

Łukasz Gliński
Wondering how good this kit is, will follow

servalpe
@Lukasz, this kit is not bad. I have done some scratch, like seat belts, collective pitch levers, panel and console due to missing details on cockpit. The Hobby Boss SH/HH-60 family is the good one 😉

Ekki
Watching.

Villiers de Vos
Nice work on the instrument panel. very nice progress.

Michael Kohl
which version are you going for?

servalpe
@Michael. UH-60A with desert scheme - Gulf War»Operation Desert Storm.

Stephan Fässler
Love it

Cristian A
Nice, taking a seat

Mr D
Coming along nicely, like the extra touches you have done, HB can simplify a bit.
I just purchased the Zvezda Mi-8, will be my first helli.
Top stuff will keep an 👀 on this build.
😀👍👍

servalpe
Thanks guys for your comments and likes. @Mr D, I will build, HB Mi-8MT next year, but I will mix with part of Zvezda 7253 (Mi-8MT) if I find one 😉.

Mr D
I know there running a bit short on them at min, l found my one on Amazon... being sent from Germany, l think it's maybe some kind of trade sanction going on with Zvezda being in Russia??
Good luck with your build 😀👍

servalpe
@Mr D, I found one on an Spanish website and I am going pick up it today 😉. I have also got some aftermarkets from an Spanish scalemate.

Mr D
Great 😃👍
Servalpe, My Mi-8 arrived today, looks really good, box is big for 1:72.
I have a Diorama in mind 🤔.
Good luck.

servalpe
@Mr D, the box is the Zvezda small one. The HB kit is better than Zvezda one. It's has more accurated, has detailed external parts and cockpit. The advantages of Zvezda is that has seats and doors for cargo cabin and weapons supports ( I will use this parts) and has raised rivers. HB model has not any rivet.

servalpe
Mr D, the box is the Zvezda small one. The HB kit is better than Zvezda one. It's more accurated, has detailed external parts and cockpit. The advantages of Zvezda is that has seats and doors for cargo cabin and weapons supports ( I will use this parts) and has raised rivets. HB model has not any rivet.

Mr D
Hi Servalpe,
Ok thanks, sounds like you can make one good one out the two kits ?
I was considering the HB one but l liked the idea of the kit being from Russia for my planed Diorama... I'm going to do a Chernobyl disaster Diorama, with the Mi-8 dropping the sand n lead bags on the damaged core.
There is a guy on eBay selling the 3d printed damaged power station.
It will be view looking down from Mi-8 as station is small.
Some UV led's be nice for the core.
The Blackhawk is looking really good 👍👍
I'm build the HB IAR-80 at min, it's been ok build so far. Instructions bit weak !! But nothing that isn't obvious. If lm ever unsure l watch YouTube vids
Thanks for the advice n good to hear about you ideas for your mi-8 build 👋😃👍

servalpe
@Mr D I have added a new project with Mi-8