Newsfeed-
polite_wall
deține acest articol
deține acest articol
RG
ZGMF-X56S/β Sword Impulse Gundam Premium Bandai Limited Bandai Spirits 1:144
5061034 2020 Piese noi 15 August, 18:18
Roland Sachsenhofer
a adăugat un nou photoalbum.
a adăugat un nou photoalbum.
19 9 August, 07:14
Roland Sachsenhofer
In view of the start of this build, I was tempted by the following motto: "From ugly duckling to swan": the kit offers a number of interesting challenges, but gives an idea of the potential both as a model and as a representation of a true aircraft beauty! I will try my best to make the swan appear....
A first challenge: roughly moulded parts, poor fit and a wing that wants too much in a positive V-position.... A second challenge will follow in the form of a Vacu canopy that has turned yellow with age; this will give me the opportunity to try out the doing in Vac-canopy myself. More of that next time...
In view of the start of this build, I was tempted by the following motto: "From ugly duckling to swan": the kit offers a number of interesting challenges, but gives an idea of the potential both as a model and as a representation of a true aircraft beauty! I will try my best to make the swan appear....
A first challenge: roughly moulded parts, poor fit and a wing that wants too much in a positive V-position.... A second challenge will follow in the form of a Vacu canopy that has turned yellow with age; this will give me the opportunity to try out the doing in Vac-canopy myself. More of that next time...
9 August, 07:18
Transall NG
Nice aircraft !
One was used in the last phase of the New Guinea gold rush in the 30's...
Good luck !
@+
Nice aircraft !
One was used in the last phase of the New Guinea gold rush in the 30's...
Good luck !
@+
9 August, 11:50
Cuajete
Great, Roland!
I would like to see the steps you follow when making the Vac-canopy.
Great, Roland!
I would like to see the steps you follow when making the Vac-canopy.
9 August, 17:52
Roland Sachsenhofer
Thank you for your interest, I appreciate it!
Cuajete, I'd be happy to show you a few photos of the progress of the construction and application of the self-moulded Vac canopy. It seems to have produced a reasonable result so far....
Thank you for your interest, I appreciate it!
Cuajete, I'd be happy to show you a few photos of the progress of the construction and application of the self-moulded Vac canopy. It seems to have produced a reasonable result so far....
10 August, 17:25
Erik Leijdens
An unusual subject Roland! No doubt you will end up with a fantastic result
An unusual subject Roland! No doubt you will end up with a fantastic result
10 August, 17:34
Cuajete
Many thanks, Roland!
Great job with the putty party and vacuum canopy 👍
What thermoformer did you use?
Many thanks, Roland!
Great job with the putty party and vacuum canopy 👍
What thermoformer did you use?
10 August, 18:22
Thomas Kolb
This look like an intriguing project, but she's definitely a putty queen! I am super impressed with the vac-forming!
This look like an intriguing project, but she's definitely a putty queen! I am super impressed with the vac-forming!
10 August, 19:02
Roland Sachsenhofer
Thank you very much for the answers, mates! I'll show you a few new pictures from today: the surfaces have been reworked with 2000 grit sandpaper (even if it may not look like it, dusty as the "duckling" still is) to prepare it for a first coat of paint. This will certainly show the need for correction! 🙂
Thank you very much for the answers, mates! I'll show you a few new pictures from today: the surfaces have been reworked with 2000 grit sandpaper (even if it may not look like it, dusty as the "duckling" still is) to prepare it for a first coat of paint. This will certainly show the need for correction! 🙂
11 August, 09:28
Roland Sachsenhofer
New pictures of the current state of construction: the 'Baby Clipper' still looks very dark, but in the next step it will get an 'Azur' blue underside, which will be completed by 'Middle Stone' and 'Dark Earth' on the upper sides. Since prototype photos already show this machine with heavy signs of use and weathering, I will endeavour to achieve a similar look here.
New pictures of the current state of construction: the 'Baby Clipper' still looks very dark, but in the next step it will get an 'Azur' blue underside, which will be completed by 'Middle Stone' and 'Dark Earth' on the upper sides. Since prototype photos already show this machine with heavy signs of use and weathering, I will endeavour to achieve a similar look here.
14 August, 09:26
Jens-Micael J
a adăugat un nou photoalbum.
a adăugat un nou photoalbum.
30 imagini
Leopard 2A6 Tank "Ukraine" WIPNou: 15 August, 18:09 1:35
Proiect: Leopard 2A6 Tank "Ukraine"
15 August, 18:03
Derek Huggett
deține acest articol
deține acest articol
F-16 Falcon Canopy Detail Set
Model Technologies 1:72
MT0047 15 August, 18:07
Filip
a adăugat un nou photoalbum.
a adăugat un nou photoalbum.
7 15 August, 10:27
Filip
Thank you.
Considering it's age, it's not as bad as I was expecting. I didn't come across any major fitting issues, but individual parts need to be cleaned from a lots of excessive plastic. But the manual is just terrible. Sometimes I wasn't sure how the parts were supposed to fit together. Decals are surprisingly good.
Thank you.
Considering it's age, it's not as bad as I was expecting. I didn't come across any major fitting issues, but individual parts need to be cleaned from a lots of excessive plastic. But the manual is just terrible. Sometimes I wasn't sure how the parts were supposed to fit together. Decals are surprisingly good.
15 August, 13:33
LJG
deține acest articol
deține acest articol
MiG-21MF The Bunny Fighter Bunny Fighter Club Member Edition / BFC T-shirt
Eduard 1:72
BFC094 2019 Piese noi 15 August, 18:06
AndreasK » Cereri de caracteristici
I added colours to some projects to remember later what I used.
When one colour was empty, I removed it from my stash. Now it also disappeared from the project. Not what I intended...
Is there a different possibility to link colours permanently to projects without connection to the own colour stash?
I added colours to some projects to remember later what I used.
When one colour was empty, I removed it from my stash. Now it also disappeared from the project. Not what I intended...
Is there a different possibility to link colours permanently to projects without connection to the own colour stash?
Implementat
1 30 April 2023, 14:07
scalemates
do you remember the "Status" you gave to it and can you link the project please?
do you remember the "Status" you gave to it and can you link the project please?
1 May 2023, 20:59
AndreasK
Curtiss SB2C Helldiver | Project by AndreasK (1:48)
Status of the project was/is completed.
The colour of concern is Mr. Hobby H58 which is now missing
Curtiss SB2C Helldiver | Project by AndreasK (1:48)
Status of the project was/is completed.
The colour of concern is Mr. Hobby H58 which is now missing
2 May 2023, 05:55
scalemates
this is fixed, you can now mark a paint as "trashed/lost/...", doing that will keep it visible under projects
this is fixed, you can now mark a paint as "trashed/lost/...", doing that will keep it visible under projects
15 August, 18:03
Jan Raska
a adăugat un nou photoalbum.
a adăugat un nou photoalbum.
16 imagini
M3A3 Bradley CFV, Saber Strike 2015Nou: 15 August, 18:01 1:35
Proiect: M3A3 Bradley CFV, Saber Strike 2015
17 17 February 2023, 04:48
Gerry
deține acest articol
deține acest articol
M1070 Truck Tractor & M1000 Heavy Equipment Transporter Semi-trailer
HobbyBoss 1:35
85502 2011 Instrumentul nou 15 August, 18:01
Jan Raska
a adăugat un nou photoalbum.
a adăugat un nou photoalbum.
18 imagini
M1A2 Abrams SEPv2, Saber Strike 2015Nou: 15 August, 18:00 1:35
Proiect: M1A2 Abrams SEPv2, Saber Strike 2015
7 7 July 2023, 18:19
/ro/search.php?q=*&page=newsfeed&fkSECTION[]=Newsfeed
search-solr.php?lang=ro
35
35
/ro/search.php?q=*&page=newsfeed&fkSECTION[]=Newsfeed
35
todo