Newsfeed-

Spanjaard
that same would go for hobbies1001 SCM Search: Shops 1001hob*

bughunter
There are more problems: if I hover with the mouse on a kit page/Marketplace over the button it says "Order now on super-hobby.de" (where I'm logged on), but after a click for me mojehobby.pl opens, where I'm not logged on.

Finn
Cool project, best of luck

Tony Stark
Thanks Finn!

Nicolas
I'm in. 👍

Tony Stark
Once I have finished the 2 HHrAviation F-16's I will be starting this enormous beauty.

Живко Джаков
Interesting start!

Simon O'Gorman
I felt very uncomfortable cutting out the fuselage sections - I'd never done that before - but with the doors dropped open it means the cockpit will be more open.

Ben M
Watching… I built this one last year.

Simon O'Gorman
Ah, cool! It's my first go at airbrushing and all going very slowly. But I'll get there in the end.

Michael Jonker
Great show. Watching with interest 🍿

LucLuke B
I'll be building this one soonish so am following.

Alex K
Me too... I've built the ancient-tool Airfix, but I have also bought the new one, and watching your work progress helps a lot.

Simon O'Gorman
Ah, look forward to seeing how you go lads. I'm no expert I'm afraid but you may pick up some tips as to what not to do
🙂

Ben M
Watching.

Guy Rump
Following. 👍

Robert Podkoński
Following too. Good job so far, keep it up!

Andy M
Never built a biplane before so watching this with interest!

Simon O'Gorman
Thanks Robert. Slow going, but I'll get there.

Jennifer Franklin
Very nice work, looking forward to seeing a finished model. 👍

Dave
Watching progress on this one, looks good.

Łukasz Gliński
Joining the party , looks promising 👍

Thomas Espe
👀

Benny Michiels
Following.

Andy Ball
Terrific journalism on this build, I see the learning curve has yielded results! Bravo.

Simon O'Gorman
Thanks Andy, I'm recording the all the disasters along with the little wins. And the learning curve has been dramatic!

Ethan Flory
Looking very good Simon!!

Simon O'Gorman
Thank you Ethan, and to everyone above. Encouraging comments are like a little shot adrenaline. They are all very much appreciated.

Nicolas
Looks very good so far. Joining for the final.

Simon O'Gorman
Thanks Nicolas, nearly there!

Alec K
Nice work there, looks like it was a fruitful learning journey 👍

Guy Rump
Nice result! 👍

LucLuke B
Well done. It looks like a fiddly model to build.

Simon O'Gorman
Thanks Guy!

Simon O'Gorman
Thanks Luke, to be honest I couldn't tell if the model was fiddly or I wasn't doing it right.

Simon O'Gorman
Thanks Alec, and yes, it was a great learning journey.

Dave Flitton
Some good work there, glad you finished it.

Simon O'Gorman
Thanks Dave, it became a saga alright.

Ben M
I built that kit too, and it's tricky to get all the struts and such for the upper wing

Simon O'Gorman
Yeah, that was really tricky for me too, Ben. Huge learning curve! What I should have done was glue the outer struts to the bottom and dry-fitted the top until it was set - then glued the centre struts into the top wing, and put the two together. Getting this wrong can ruin the build.

Ben M
I did the center ones first, glued top wing on, and then fit the outboard ones: Leger VVC Batavia Tiger Moth | Album by Bourgeois Detailism (1:72)

Simon O'Gorman
Just looked at your album Ben, a really nice build. Loved your prop and the rigging looks great. Very nice!

Robert Podkoński
Great job, Simon! Thanks for your suggestions - I intend to built one too.

Simon O'Gorman
Thanks Robert, good luck with it, it's great fun to build.

NickA
Good outcome, this was the first biplane I had made for decades and it ended up looking like one too! I then built Airfix's 1/48 offering which goes together even better. I just need the courage to attempt some rigging.

Simon O'Gorman
Me too Nick, need to summon some rigging courage for the next biplane. I don't feel ready, but I guess you probably never feel ready.

Michael Schubert
Love it! I just got the top wing set on mine and promptly dropped it and it fell into 3 pieces 🤦🏻‍♂️ turned out ok, but a close look shows its flaws haha, the colour scheme you chose is cool and it turned out great 👍

Pietro De Angelis
Very very nice, congrats!

Łukasz Gliński
You're more than right Simon. Most of us never feel ready 😄

Simon O'Gorman
Aaaaaah, Michael! I feel your pain. Mine shows its flaws on close inspection too. Glad it tuned out okay. And thank you for your kind words.

Simon O'Gorman
Good to know others feel the same Łukasz.

Simon O'Gorman
Thanks Pietro, much appreciated.

Nicolas
Hey Simon, nice to see that you have successfully completed the build. I can well understand that you don't fancy the bracing, I'm currently doing that on my Christen Eagle.

Simon O'Gorman
Look forward to seeing how that turns out Nicolas.

Chris T. An
This is the first time for me to tackle a complete resin kit. And when I look at the individual parts, it will be a real challenge. There is an extreme amount of rework needed on each part. Hope I can get it to work.

Finn
Best of luck, it will be interesting to follow

Michael Kohl
I am in too

Robert Podkoński
I will watch with pleasure and interest too.

Alex K
A 3D-printed PZL Dromader???!!! Following for sure!! (The Grand Models cast-resin kit is perhaps above my skills - and I still wait for the Karaya injection one...). Your ag-aircraft & ground equipment dio will turn... monumental! 👍

Marcel Klemmer
Very interesting project👍 I am in

Villiers de Vos
Very nice progress on an unusual subject.

Chris T. An
Thank you all for watching. Alex, I also saw the Grand Models kit for the M18, but I was frightened from some build reviews, there is a lot of rework to do on that kits. I have now the same or a bit more work, but I got the 3D file for free from Thingiverse.

I am really not a Pro in sratch building but I will try to engrave some panel lines and add some more greeblies to the plane. The 3D file is very poor in details.

Alex K
Nice progress! 👍

Robert Podkoński
Fantastic Dromader! (I wish I had one... I have no access to 3d printing, alas...😭 )

Chris T. An
Robert, you can have a look to the Grand Models resin kits. I am much more disappointed that there is no kit in 1:72 and no 3D file of a PZL 106 Kruk. I would spend some money on that because it would fit perfect to the Dromader and Cmelák.

Robert Podkoński
Actually, that is something that makes me angry too - I would love to see (and buy) decent kits of "Wilga" and "Kruk" (not mentioning PZL M-15 "Belphegor" 😉 )... but apparently no Polish manufacturers are interested in preparing these.

Alex K
Guys... let's look a bit at the bright side: who would have thought a few years ago that one day (today!) there would be kits of the Cmelak, the Dromader, the Grumman AgCat (in both 1:72 & 1:48!!!), the Piper Pawnee?! Some are short-run, some are cast-resin, some are 3D-files-to print - nevertheless, something is slowly moving towards that direction! So, yes, I do hope too there will be someday a Kruk available in 1:72 or a Belphegor! And your buys of such kits and your modelling work proves that there's some interest in such topics! Keep it up! 👍

Robert Podkoński
You're right, Alex 🙂 "Always look on the bright side of life..." 😉

Robert Podkoński
I am afraid there is a spelling error on the decals, Chris... I see "Dromedar" instead of "Dromader"... The plane looks awesome!

Chris T. An
Robert, I can understand that it is confusing, but in the GDR, "Dromedar" was actually used. This is the German translation of the word. Feel free to search for pictures of it, here would be an example: [img1]

Robert Podkoński
I have not known about that, sorry Chris... That's really interesting.

Alex K
Nice trivia... and as Robert said: it looks awesome!

Bernhard Schrock
Dromader: An outstanding result from such a simple kit!

Neuling
Everything top notch here! But what about the excavator? May a combined diorama?

Chris T. An
The excavator is still coming. I haven't dared to go any further yet. Let's see, maybe I'll get motivated again in the fall/winter. 😉

Neuling
👍

Michael Kohl
Very well done Dromedar. Anxious about the excavator.

Villiers de Vos
Fantastic work on the crop duster.

Chris T. An
It is not easy to find out with which lettering the excavator was delivered in the color used in the respective year of construction. I'll have to see which decals I print out.

Ben M
What a great project! You got an amazing result with the 3d printed aircraft.

Mark Sherwood
That's excellent, I operate a CAT M3050 Material Handler at work, very similar. Weathering on the grabs are spot on. 🥸👍

Spanjaard
that is looking amazing, and it is not yet finished.....

gorby
Fantastic work so far.

Chris T. An
Thank you guys. So now I can set all the small projects into place for the final diorama. Think I will need one more figure to show an excavator operator.

Łukasz Gliński
That excavator looks insanely real 👍

Michael Kohl
Just saw one cycling in the Erzgebirge and can only agree with Lukasz. Weathering is spot on.

Finn
Awesome!

Robert Podkoński
Fantastic job!

Bernhard Pethe
Genau wie ich den T174 gekannt habe. Super! 👍

Chris T. An
So I finally finished the complete diorama. Hope you like it.

Ben M
It's wonderful!

Robert Podkoński
Awesome job! Chapeau bas!

gorby
WOW, stunning dio!
Is the digger going to grab the Trabant? 😄

Alex K
Oh my... Deepest respects!

Spanjaard
fantastic!!!

Michael Kohl
Chris, maybe you mentioned it somewhere, but where do figures and Trabant come from? Maybe you can even add those to the project's kit list.

Guy Rump
Very impressive and unusual dio. 👍

Chris T. An
Thanks to all of you, really appreciate it. Danke!

Joe K
impressive!!!

Mojo DeVirus
Niceeeeeeeeeeeeeeeeeeeeee !!!

Villiers de Vos
Very nice work and weathering.

Pietro De Angelis
Really impressive!

Kirill K.
Отличная "Кувалда" вышла!