Newsfeed-

Ludvík Kružík
I still miss this small helicopter in my collection of flying machines used in Czechoslovakia. The time has come for me to rectify that. 😉

Villiers de Vos
I will follow along.

Ludvík Kružík
Welcome Villiers! 🙂

Greg Baker
Oh. I built a 1/72 version of the Mi-1M... This should be interesting.

Ludvík Kružík
Hello, Greg. I know there's a Mi-1M kit in 1/72nd scale. Unfortunately, only this and a rather old kit from Special Hobby exists in 1/48 scale. In addition, this kit is an older version of the Mi-1A, which is different from the upgraded version of the Mi-1M. It has a different nose shape, different cockpit glazing and other minor changes. And since I decided to build the upgraded version of the Mi-1M, I will not avoid modifications to the kit.
To give you a better idea of the extent of the modifications to the kit, I've included a picture with the differences between the Mi-1A and Mi-1M versions color coded.

Greg Baker
Oh, neat! I didn't realize there were so many changes between the versions. This is going to look great!

Ludvík Kružík
Greg, thank you for your support.
____________________
I started building the model by making new transparent parts.

Alec K
Taking a seat, this brings back memories of ABC magazine 😜👍

gorby
Nice work moulding the new transparent parts.

Greg Baker
Yeah. Nice work on the heat-n-smash moulding for the clear parts. That can be tricky to do.

Ludvík Kružík
@Alec K
I used to buy ABC magazine regularly as a kid and eagerly awaited each new issue 🙂. I assume your mention of ABC magazine refers to the occasional modeling tutorial section.

@gorby, @Greg Baker
It's not too difficult to make new transparent parts by stretching warmed transparent foil over a pre-made template. Preparing the template is the most work. Stretching the warmed foil onto the template is just a routine that anyone can do after a few attempts.

Alec K
Correct 🙂👍👍

Robert Podkoński
How have I missed this? Taking a seat for sure! 🙂

Ludvík Kružík
Hello, Robert! Good to see you here. You haven't missed much so far. Up to this point I've been more concerned with preparation than building the model.

Ludvík Kružík
I want to try to use the sandwich construction in the production of new glass parts for the coptics. So I made (using the same process as the transparent parts) parts out of white plastic sheeting. These parts will have holes cut out for the windows. The transparent part will then be inserted between these two parts. The white outer and inner parts will form the embossed framing of the transparent part.

Jennifer Franklin
That looks great (as per usual 😛)

Ludvík Kružík
Welcome, Jennifer, we're glad to have you on board and thank you for your goodwill. 🙂

Ludvík Kružík
I came back from vacation and it started to rain. Ideal conditions for modelling. 🙂

So I'm back and continuing to work on the model. I need to glue the finished nose to the glued fuselage so the cockpit overlay fits exactly. That determines the workflow. First I have to finish the nose and the inside of the fuselage and glue all the parts that need to be glued to the fuselage halves from the inside. After gluing the fuselage halves together, I would no longer be able to get to these parts (or only with great difficulty).

Photos of the work progress will be coming soon.

Alexander Grivonev
Oh some modeling for big boys, not glueing perfectly fitting parts together and throwing on some paint! Following 👍

Ludvík Kružík
Welcome, Alexander! 🙂

Clement
Nicely done, the weathering is spot on!

Nicolas
I got this kit on the to do list as well so I'm following. Nice start.

Robert Podkoński
Following, of course! I loved these "original" Kovozavody kits.

Łukasz Gliński
What a trip down the memory lane for just 3 bucks 😄 👍

Ben M
The fit on this kit…. Not great, not terrible.

Guy Rump
Following. 👍

Ludvík Kružík
This really is a trip into history. I wish you well with your work on the model. And I'll be happy to follow the progress.

The drop tanks used on the Mig you are building are the original (older) version. They were attached directly to the wing (no hinge) and did not have stabilizing ailerons on the end. This type of tanks had one unpleasant feature. When dropping the empty tank, the tank rolled on the wing. This was annoying because it could damage the control surfaces. Therefore, these tanks were replaced by a new type with stabilizing surfaces at the end of the tank and these tanks were suspended on a wing hanger (tanks of this type are in the kit). This solution eliminated the rolling problem.

Ben M
Ludvik, thank you for the details. I did not know that. I imagine they usually did not drop the tanks on trainers.

I also masked the canopy last night. The molding of the frames are a bit vague and lots of curves so it will require some cleanup after painting.

Ludvík Kružík
Ben, you're right that trainer planes didn't usually drop tanks. In peacetime, in normal use, even combat aircraft don't drop tanks (except in emergency situations or exercises).

The purpose of my comment was merely to explain why the tanks on Indonesian aircraft differ from those in the kit.

I look forward to following your progress and wish you a lot of fun building the model and the result to your liking.

Mr D
Doing a nice job 👌
I would by one for 3$ anytime 🤣

Ben M
The fit on this kit is ludicrous. Having a lot of fun with it though.

Ben M
Well the other night I got frustrated with the Vallejo gloss black primer clogging my airbrush, so I added some Mr leveling thinner and gave it the worst orange peel ever as this is totally incompatible with the paint. I thought I could selectively strip the paint with windex but while that kind of stripped the paint it also dissolved a lot of the perfect plastic putty and also dissolved the canopy pva glue and masking. Also I broke off a wing and a horizontal stabilizer. So a bit of a setback.

I have constant problems getting the Vallejo gloss black primer to not clog my 0.4mm nozzle.

Robert Podkoński
Sorry to hear that, Ben...

Duster_d
It's sad, Ben. These Vallejo primers can only be diluted with distilled water because they are based on acrylic urethane (this is my IMHO). Even Vallejo's Thinner and Flow Improver for acrylic paints does not go well with these primers. The same applies to their polyurethane varnishes.

Martin Oostrom
Not saying this will solve your issue, but they have a video with ratios out: Youtube Video

Sy Bar
Wow that video seam to show it's a lot of hard work to get their primer coat working 👀
I'd go with mr surfacer 1500 approx 50:50 with mr levelling thinner, then if you need a gloss use mr Color gx110 again 50:50 with levelling thinner, sounds just as complex but I've never had this block airbrush and you can get rid of surface issue before you gloss saving the thicker gloss primer obscuring details..

Good luck on you build

Łukasz Gliński
Very sad nwes mate - hope to see you back on this project with the new kit, this one looks fubar unfortunately.

Ben M
I have not yet begun to fight. It is but a flesh wound.

Ben M
Painted some detail parts. Unlike the Vallejo primer, the metallics shoot like a dream. Started reassembly. I will have to re-putty and this kit needs a lot of putty. The canopy is a goopy fogged mess, I'm going to soak it in degreaser to hopefully strip off the future and start over on it.

Nicolas
What a mess. Good luck fixing it.

Finn
Following

Ludvík Kružík
The accident on your project is really unpleasant. I wish you a steady hand and a lot of patience in dealing with the aftermath.

Ben M
It's going okay. Not giving up is part of the fun for me.

M0rce
Wow, that looks like a tough kit...
Coming along nicely now though it seems.. 👍
Looking forward to updates.

Robert Podkoński
I'm impressed with your perseverance, Ben... Keep it up!

Ben M
I finally broke the pitot tube off, amazing it stayed on this long with all the handling I had to do. The second time I did the puttying I didn't sand things as smooth, live and learn. This kit has a lot of challenging fit issues. I think I will decal next. Fairly happy with the canopy, it was a bear to mask. The gun blast panel and air brakes came out nice, slight contrast with the rest of the nmf.

Ben M
Landing gear, drop tanks, and antennae on

Ludvík Kružík
Ben, I admire your patience and determination to finish the model.
Have you considered subtle colour differentiation of the individual panels? It'll brighten up the uniform silver surface of the aircraft nicely.

Mr James
What a brilliant display. So very well done. Lovely weathering damage on the Zimmerit and great composition and painting of the figures.

Christoph Kunz
These dark pictures are most impressive. 👍
And all the small details are excellent. I like things like the spalshing puddle, top work.

Neuling
A very considerate work with careful layout and planning. Paintwork, detailing and weathering are top notch. Congrats!

Doubtingmango
Not much to add to the comments above. Great work!

Michael Kohl
All the details and thoughts you put into this added up to a most convincing composition. A realistic story well told.

Panzerwomble
Some nice details that add a lot the dynamics of the tale being told .

Pepe
Woooooooow..... Great dio.... Great idea!!!!!!

Rui S
Great work allround 👍

Alexander Grivonev
Fantastic, so much detail👍 Very dynamic like a movie scene. Brilliant figures