Newsfeed-
Markus Meyer
a adăugat un nou photoalbum.
a adăugat un nou photoalbum.
46 18 August, 17:54
Michael Kohl
The name of the last Leo strongly suggested such a comparison. Nice to see those two so well done. Fine groundwork too.
The name of the last Leo strongly suggested such a comparison. Nice to see those two so well done. Fine groundwork too.
10 October, 15:25
Snake Plissken
Never seen those brown headsets for Bundeswehr tank crew; is that just a style variant?
Don't forget the tank antennas! Tanks had full communication activated (tank to tank and tank to headquarters) even on training maneuvers.
Never seen those brown headsets for Bundeswehr tank crew; is that just a style variant?
Don't forget the tank antennas! Tanks had full communication activated (tank to tank and tank to headquarters) even on training maneuvers.
11 October, 13:06
Markus Meyer
@Snake Plissken
I did this from recollection. I remember the headsets itself as brown - but I should probably have paintzed the headband as black.
Should have checked some old references, I guess-
@Snake Plissken
I did this from recollection. I remember the headsets itself as brown - but I should probably have paintzed the headband as black.
Should have checked some old references, I guess-
13 October, 15:15
John-Alan Pascoe
a adăugat un nou photoalbum.
a adăugat un nou photoalbum.
7 2 August 2016, 22:00
Tino Löffler
deține acest articol
deține acest articol
Suzie Join the Navy and see the world! (Pin-up series Kit No. 4)
Master Box (MB) 1:24
MB24004 2015 Instrumentul nou 13 October, 15:12
dzmbr
vrea acest articol
vrea acest articol
HG Future Century
GF13-050NSW Nobell Gundam Neo Sweden Mobile Fighter Bandai Spirits 1:144
5055720 (119) 2019 Cutie nouă 13 October, 15:10
dzmbr
vrea acest articol
vrea acest articol
MGSD
ZGMF-X10A Freedom Gundam Z.A.F.T. Mobile Suit Bandai Spirits
5064257 (2619354) 2023 Instrumentul nou 13 October, 15:10
Coldwarkiddo
vrea acest articol
vrea acest articol
SMB-2 Super Mystère 'Sa'ar - Israeli Storm in the Sky' Hi-Tech Kit
Special Hobby 1:48
SH48238 2024 Piese noi 13 October, 15:09
coporado
a adăugat un nou photoalbum.
a adăugat un nou photoalbum.
54 28 March, 16:26
coporado
Build completed so far. Still waiting for the metal barrel. Quite challenging to attach the Zimmerit- PE parts. Was annoying when it comes to round shapes on the turret front armor. Treating those metal parts with some heat, made them much more handy to shape. First time using Friul tracks, very time consuming, but the best track result I´ve seen so far 🙂
Build completed so far. Still waiting for the metal barrel. Quite challenging to attach the Zimmerit- PE parts. Was annoying when it comes to round shapes on the turret front armor. Treating those metal parts with some heat, made them much more handy to shape. First time using Friul tracks, very time consuming, but the best track result I´ve seen so far 🙂
1 April, 13:59
coporado
Lower part of the tank was painted and received weathering. Tracks were mounted and connected. Rear fenders were the installed. Next is masking lower section and painting the upper parts.
Lower part of the tank was painted and received weathering. Tracks were mounted and connected. Rear fenders were the installed. Next is masking lower section and painting the upper parts.
2 June, 10:18
Christoph Kunz
Nice job. I'm taking a seat.
Is it going to be some "Magdeburg-stuff" again?
Nice job. I'm taking a seat.
Is it going to be some "Magdeburg-stuff" again?
2 June, 11:03
coporado
The tank received several rounds of paint. Starting with red brown primer, followed by dark yellow as base color and finally the camo pattern. Next is detail painting, and weathering.
The tank received several rounds of paint. Starting with red brown primer, followed by dark yellow as base color and finally the camo pattern. Next is detail painting, and weathering.
9 June, 15:30
coporado
Initial weathering steps were conducted; chipping the Zimmerit and the metal surfaces.
Initial weathering steps were conducted; chipping the Zimmerit and the metal surfaces.
16 June, 09:20
coporado
Thanks, Nick!
The exhaust was painted in a medium grey first. The parts having armor plates underneath were left in the original painting, as these area is less affected by heat and corrosion. Then a warm white followed by a reddish brown was applied using the sponge technique. Next was rust tones painted and blended with enamels. Colors of the original camo scheme where then applied with a sponge in the areas with less corrosion, to turn out the different stages of heat impact. Finally the upper parts received a slightly black shade to simulate the exhaust fume grime.
Thanks, Nick!
The exhaust was painted in a medium grey first. The parts having armor plates underneath were left in the original painting, as these area is less affected by heat and corrosion. Then a warm white followed by a reddish brown was applied using the sponge technique. Next was rust tones painted and blended with enamels. Colors of the original camo scheme where then applied with a sponge in the areas with less corrosion, to turn out the different stages of heat impact. Finally the upper parts received a slightly black shade to simulate the exhaust fume grime.
23 June, 08:21
coporado
Kick off for the base. Styrofoam is the desired material for house, road and pavement. As the road and pavement is covered with lots of dirt and debris, I added cobblestone only randomly. For the road thin sheets of styrofoam were shaped using a 3D printed rolling pin. In order to create more texture the stones were carved with a pencil. For the pavement an old brush was used to shape the small stones. Everything was painted in several greyish, brownish, sandy tones with acrylics.
The shape of house was cut with the Proxxon hot wire. To make the facade more interesting I added some "decoration" around the upper windows. A border seperates the upper and lower floor. Next is closing the gaps between the decoration elements at the upper windows and cover the lower floor with wood.
Kick off for the base. Styrofoam is the desired material for house, road and pavement. As the road and pavement is covered with lots of dirt and debris, I added cobblestone only randomly. For the road thin sheets of styrofoam were shaped using a 3D printed rolling pin. In order to create more texture the stones were carved with a pencil. For the pavement an old brush was used to shape the small stones. Everything was painted in several greyish, brownish, sandy tones with acrylics.
The shape of house was cut with the Proxxon hot wire. To make the facade more interesting I added some "decoration" around the upper windows. A border seperates the upper and lower floor. Next is closing the gaps between the decoration elements at the upper windows and cover the lower floor with wood.
28 July, 07:18
coporado
Slowly taking shape. Lower floor fassade updated with some wooden panels. Dirt and debris was added to the road and pavement and painted with the airbrush. I used the same colors I used for weathering the tank tracks. Next is windows and door installation and of course detailing the interior.
Slowly taking shape. Lower floor fassade updated with some wooden panels. Dirt and debris was added to the road and pavement and painted with the airbrush. I used the same colors I used for weathering the tank tracks. Next is windows and door installation and of course detailing the interior.
18 August, 12:32
coporado
Lower and upper floor and walls were detailed using Balsa wood and wallpaper. Added windows using Balsa and lasercut as well as some transparent plastic for the glas parts. Also the infantry miniatures arrived meanwhile.
Lower and upper floor and walls were detailed using Balsa wood and wallpaper. Added windows using Balsa and lasercut as well as some transparent plastic for the glas parts. Also the infantry miniatures arrived meanwhile.
31 August, 13:17
coporado
Scratch built some interior from balsa wood and plastic residues. The attic floor was installed. Next is finally building the lower floor entrance and preparing the roof.
Scratch built some interior from balsa wood and plastic residues. The attic floor was installed. Next is finally building the lower floor entrance and preparing the roof.
9 September, 12:26
coporado
As an important detail, I added the sign with the shop name where the Tiger was abandoned in Villers Bocage in 1944. Also the advertising was printed in a suitable font and prepared for installation.
As an important detail, I added the sign with the shop name where the Tiger was abandoned in Villers Bocage in 1944. Also the advertising was printed in a suitable font and prepared for installation.
13 October, 15:09
/ro/search.php?q=*&page=newsfeed&fkSECTION[]=Newsfeed
search-solr.php?lang=ro
35
35
/ro/search.php?q=*&page=newsfeed&fkSECTION[]=Newsfeed
35
todo