Kfir
![Album image #1 Album image #1](/albums/img/9/4/6/1579946-86785-88-720.jpg)
The office is done - save the ejection seat. After some hesitation I decided to use some Eduard photo etch, mainly to improve the ejection seat. The kits parts and decals for the instrument panel are fine and do not require an upgrade IMO.
![Album image #2 Album image #2](/albums/img/9/4/7/1579947-86785-34-720.jpg)
The AMK kit has a very good fit and everything went smoothly so far.
![Album image #3 Album image #3](/albums/img/9/4/9/1579949-86785-49-720.jpg)
Some drybrushing brought out details. Placing lights with a lighter shade of black 😉 brought some depth. PE parts added to the appearance, as did a dark grey wash.
![Album image #4 Album image #4](/albums/img/9/4/8/1579948-86785-79-720.jpg)
Ready to close the fuselage.
![Album image #5 Album image #5](/albums/img/2/5/1/1580251-86785-80-720.jpg)
Fit is great. Detail is great. I really like this kit so far.
![Album image #6 Album image #6](/albums/img/2/5/0/1580250-86785-63-720.jpg)
Grrr. Scratched the intake cone and spilled glue on it. Penaltyround.
![Album image #7 Album image #7](/albums/img/4/7/2/1580472-86785-43-720.jpg)
Fixed.
![Album image #8 Album image #8](/albums/img/9/2/5/1580925-86785-19-720.jpg)
Looks like a Kfir. If treated gently and carefully the kit goes together pretty well. The wings required some more scraping and sanding but then fit was very good. A few touch ups with superglue here and there should be sufficient.
![Album image #9 Album image #9](/albums/img/8/4/9/1582849-86785-63-720.jpg)
The ejection seat pimped with Eduards PE. This really adds to it.
![Album image #10 Album image #10](/albums/img/8/5/0/1582850-86785-21-720.jpg)
Eduards PE enhanced the office details nicely too.
![Album image #11 Album image #11](/albums/img/8/5/1/1582851-86785-34-720.jpg)
Closing the canopy turned out to be quite cumbersome.
![Album image #12 Album image #12](/albums/img/8/5/2/1582852-86785-97-720.jpg)
Endless scraping and sanding on all contact areas required to achieve a decent fit. But I will get there - sooner or later.
![Album image #13 Album image #13](/albums/img/7/6/8/1584768-86785-87-720.jpg)
There are two holes in the upperside of the wings that should close with the installation of the main landing gear. I did not like this concept and closed the holes and sanded them flat. Now I can finish my paint job and install the MLG afterwards without having to touch up my paint job again.
![Album image #14 Album image #14](/albums/img/7/7/0/1584770-86785-51-720.jpg)
The transition from nose cone to windshield showed a step, so I shimmed it with some thin plastic card and some Mr. Surfacer (not shown).
![Album image #15 Album image #15](/albums/img/7/7/7/1584777-86785-60-720.jpg)
All bits and pieces attached. Only one intake to touch up.
![Album image #16 Album image #16](/albums/img/7/9/0/1584790-86785-51-720.jpg)
Almost ready for paint.
![Album image #17 Album image #17](/albums/img/3/7/7/1587377-86785-77-720.jpg)
First try with the dreaded Red Line Hataka paint. This worked very smoothly with Vallejo Airbrush Thinner on the Griffon bombs.
![Album image #18 Album image #18](/albums/img/3/8/0/1587380-86785-58-720.jpg)
The position lights were represented by dotted lines only. So I cut them out, superglued some clear plastic card in, sanded them flush, polished and colored them with clear red and blue respectively.
![Album image #19 Album image #19](/albums/img/3/7/8/1587378-86785-38-720.jpg)
Like it better that way.
![Album image #20 Album image #20](/albums/img/3/7/9/1587379-86785-85-720.jpg)
![Album image #21 Album image #21](/albums/img/3/8/1/1587381-86785-37-720.jpg)
A drain which is found on both sides of the plane was depicted on one only. So a hole was drilled and some brass rod inserted.
![Album image #22 Album image #22](/albums/img/3/8/2/1587382-86785-33-720.jpg)
The area in front of the windshield should be ready for paint too.
![Album image #23 Album image #23](/albums/img/4/7/5/1587475-86785-70-720.jpg)
First primer coat is on.
Unfortunately I forgot to paint the canopy frame with the interior color first. Grrr.
Unfortunately I forgot to paint the canopy frame with the interior color first. Grrr.
![Album image #24 Album image #24](/albums/img/6/8/6/1588686-86785-86-720.jpg)
Imposition: carefully sanded down the primer from the canopy frame. IPA did the rest.
![Album image #25 Album image #25](/albums/img/6/8/7/1588687-86785-40-720.jpg)
Preshading. Did not work with the airbrush so I brushed it on. The canopy frame received the interior color.
![Album image #26 Album image #26](/albums/img/6/8/8/1588688-86785-23-720.jpg)
Marbeling - or better to say: Leoparding - done with masks.
![Album image #27 Album image #27](/albums/img/6/8/9/1588689-86785-31-720.jpg)
Let´s see how those masks work for the three tone camouflage. Application was acceptable. Some touch ups are still necessary. Usually I would start with one color all over and add the next one on top but then I will loose more of the preshading with the second layer of color. So I will try to airbrush each color on the designated areas only.
![Album image #28 Album image #28](/albums/img/4/7/3/1589473-86785-16-720.jpg)
Started with the weapons.
![Album image #29 Album image #29](/albums/img/4/7/4/1589474-86785-60-720.jpg)
![Album image #30 Album image #30](/albums/img/4/7/2/1589472-86785-69-720.jpg)
First color slashed on.
![Album image #31 Album image #31](/albums/img/6/1/5/1590615-86785-22-720.jpg)
second color done. As you can see with all the additional masking tape, the precut tapes are no care free solution. Apart from that I do not like the effect of the preshading at all. Contrast is too strong and paint layers build up too thick when I ameliorate it. With my Super Mystere I used the postshading techniques and I liked the effect much better. So I will stop here and take a deep breath to decide how to continue.
![Album image #32 Album image #32](/albums/img/6/1/6/1590616-86785-58-720.jpg)
Note to self to show the colors I used for the IAI Griffin LGBs. Surprisingly the color charts state a monochrome green for the Griffins while the box art shows at least two colors. I did not find any pics of Israeli Griffins, so I had to stick to pictures of a colombian one. But as this is an IAI product and I do not think that they would have applied a different paint job especially for Colombia, I suppose that the israeli ones had the same design. From the pictures available I mixed a light olive drab for the fins, a darker green for the charge and a light reddish brown for the guidance segment. Quite a bit of effort for the ordnance.
![Album image #33 Album image #33](/albums/img/6/1/7/1590617-86785-67-720.jpg)
But doesn´t look too shabby. 😉
![Album image #34 Album image #34](/albums/img/2/0/7/1594207-86785-31-720.jpg)
After a successful test on a fuel tank I opted for another technique to get rid of my paint job than sanding and rescribing. A slight rub with IPA removed just the coloured layer and the shading without damaging the primer too much. Done mostly with cotton buds I had good control over the process. Here the very expensive tightly rolled Tamiya cotton buds shined as they didn't disintegrate even with more forceful rubbing.
![Album image #35 Album image #35](/albums/img/2/0/8/1594208-86785-42-720.jpg)
That is the result. I am quite happy with it. I will let it cure for a day and give it a light sanding before I start the next attempt on the camouflage
![Album image #36 Album image #36](/albums/img/1/5/0/1603150-86785-51-720.jpg)
First color applied (well actually the second as the lower part was already airbrushed and masked) and some variation added. Those are quite subtle. Maybe I will enhance that later on a bit more.
![Album image #37 Album image #37](/albums/img/1/5/1/1603151-86785-27-720.jpg)
The plastic masks served as templates for homecut kabuki masks as I prefer working with that masking material. Eager for the second round 🙂.
![Album image #38 Album image #38](/albums/img/5/7/9/1606579-86785-13-720.jpg)
2. round done with some shading.
![Album image #39 Album image #39](/albums/img/5/8/0/1606580-86785-45-720.jpg)
Green lights are on for green.
![Album image #40 Album image #40](/albums/img/5/7/7/1606577-86785-65-720.jpg)
And finally the third color is on.
![Album image #41 Album image #41](/albums/img/5/7/8/1606578-86785-12-720.jpg)
Paint job is not perfect (as expected) but should form a decent base after some touch ups.
![Album image #42 Album image #42](/albums/img/5/7/6/1606576-86785-98-720.jpg)
I have been pondering quite a bit about the color of the lower part. The instructions call for H308 but that seemed much too dark if I look at my reference pictures. So I finally opted for C314.
![Album image #43 Album image #43](/albums/img/5/7/2/1607572-86785-80-720.jpg)
Basic paint job of the fuel tanks done.
![Album image #44 Album image #44](/albums/img/3/7/2/1608372-86785-30-720.jpg)
Will redo the landing gear. This received the H308 gray as recommended in the instructions too but I all the pics I've seen show a much lighter color. I will go with white as this is the color of the wheel well too and was recommended in instructions of other Kfir kits and other contemporary israeli planes with 3 tone camo. So going for white seems plausible. The rims were sometimes dark gray. So here I might stick to the AMK instructions.
![Album image #45 Album image #45](/albums/img/3/7/1/1608371-86785-95-720.jpg)
Before touching up the camo I decided to spray all the little details. The black part at the fin tip is not mentioned in the instructions but is clearly visible on all planes.
![Album image #46 Album image #46](/albums/img/3/7/0/1608370-86785-66-720.jpg)
Chrome and high gloss for the rear "window", burned iron for the gun shrouds, dark gray for the laser guiding device (?), black for the cone.
![Album image #47 Album image #47](/albums/img/3/6/8/1608368-86785-39-720.jpg)
![Album image #48 Album image #48](/albums/img/3/6/7/1608367-86785-28-720.jpg)
![Album image #49 Album image #49](/albums/img/3/6/9/1608369-86785-94-720.jpg)
Now let's grab them brushes.
![Album image #50 Album image #50](/albums/img/3/4/6/1609346-86785-41-720.jpg)
Ready for ordnance. Paint touched up too. That was more difficult than expected as the colors behaved not nicely when brushed.
![Album image #51 Album image #51](/albums/img/4/4/8/1621448-86785-18-720.jpg)
Finished the exhaust.
![Album image #52 Album image #52](/albums/img/4/4/9/1621449-86785-84-720.jpg)
Not too unhappy with the result.
![Album image #53 Album image #53](/albums/img/4/5/0/1621450-86785-25-720.jpg)
Was considering a resin upgrade but decided that the kit part is quite decent as it
Comentarii
42 23 October 2023, 16:21
![](/profiles/img/user-s.jpg)
I felt the strong urge to build something israeli. Having a Fouga Magister and a Kfir in my stash I opted for the latter. With a Super Mystere and a Mustang in two tone camouflage it is now time for the three tone one on the Kfir.
The Kfir.
France was the main arms supplier of Israel until the end of the sixties. She terminated that role and even installed an arms embargo in 1967, denying Israel even arms already payed for. So Israel produced the Kfir out of a mix of reverse engineering the Mirage IIIC already in service, industrial espionage and own development. In service from the mid seventies on, it´s air superiority role was soon taken over by F15s and F16s and the Kfir was mainly used as a ground attack aircraft.
There are quite a few of these aircraft scattered throughout the country, mostly the earlier C2 version. You find them in Museums, at the center of roundabouts or in front of Airforce Camps. The upgraded C7 you will find at the Airforce Museum in Hatzerim, close to Beersheva.
My version will be a C7 with the ordnance of the cover art picture.
23 October 2023, 17:35
![](/profiles/img/50023-373-s.jpg)
Watching! Good work so far.
I have two of these kits awaiting their turn in some years (...). So you'll do the three tone desert scheme?
1 November 2023, 21:55
![](/profiles/img/user-s.jpg)
Welcome mates. Nice to have you around.
Yes Marius, three tone is the goal.
2 November 2023, 14:02
![](/profiles/img/user-s.jpg)
Well, inpatience got the better of me as I wanted to put on a first coat of primer. Now I realise that I forgot the mirrors at the canopy and that the canopy frame should have received a coat with interior color first. Grr.
Mistake one will stay like this, mistake to I will try to correct by washing of the primer at the canopy with IPA.
2 November 2023, 14:05
![](/profiles/img/user-s.jpg)
Dont worry too much the interior color of the cockpit frame.
Most people wont notice any color difference there.
And pics of the actual kfir show a black color on the inside.
Sometimes it seems more like a convention for scale modelling than an actual fact, to color the inside frame in the interior color.
4 November 2023, 12:15
![](/profiles/img/user-s.jpg)
Welcome mates and thanks for the encouragement.
Mikel, thanks for your input. I think you are right. I checked again and while the windshield might have the interior color at the inside of the frame (on an American machine), I found a pic of a scavenged Israeli C7 with the canopy open and it is definitely black on the inside.
But I will leave it as it is now anyway.
4 November 2023, 18:00
![](/profiles/img/user-s.jpg)
Hi Dave and Martin. If my experiences will help avoid trouble and enhance fun I will be more than pleased. Right now I have this on hold as I do not like the look of the preshading. I will have to decide now on how to procede. Probably I will redo the paint job with a different approach.
6 November 2023, 12:26
![](/profiles/img/50023-373-s.jpg)
Sorry to hear about the stepback. It happened to my last two models too. What I did is to sand down lightly and gently the current paint to some extent and gently go over all details once more with a scribind tool (those ones which are like a pen and are only pointy), so that details become crisp again. I did this over all bolts/rivets too. It took me less than 3 hours overall. Then I applied new paint and I was generall happy with the result. If you consider this effort to take less time than starting your model from 0, then it's probably worth it indeed.
9 November 2023, 06:33
![](/profiles/img/user-s.jpg)
Hi Marius. Thanx for the heads up. The technique you suggest is actually exactly what I intend to do. Detail is still quite crisp, so I might limit the rescribing to selected areas. I will see.
By the way: your Phantom serves as a role model for me. That is the quality I strive for in my build. Cross your fingers. (I know you will 🙂 )
9 November 2023, 12:40
![](/profiles/img/user-s.jpg)
Well. What do I care about the rubbish I said yesterday!? 😜
Trying it out successfully on a fuel tank I finally opted for another technique. A slight rub with IPA removed just the coloured layer and the shading without damaging the primer too much. Done mostly with cotton buds I even had good control over the process. Here the very expensive tightly rolled fine Tamiya cotton buds shined as they didn't disintegrate even with more forceful rubbing and allowed me to reach into all the thight spots.
11 November 2023, 13:17
![](/profiles/img/user-s.jpg)
Robert, you are welcome any time. Thanks Jos and all the other mates for sneeking in and leaving a like.
I touched up the three tone camo but the Mr. Hobby Color paints did not behave nicely when brushed. So even even after the repair I've been unhappy with the result. I sanded the thick paint layer with a high grit, masked the dark brown color another time and airbrushed the defective areas. Not perfect but much better. Now onto the last detail paintings.
19 December 2023, 13:00