Perete
Wall
coporado
a adăugat un nou photoalbum.
a adăugat un nou photoalbum.
All comments (16) » 34 28 March, 16:26
coporado
Thanks, Nick!
The exhaust was painted in a medium grey first. The parts having armor plates underneath were left in the original painting, as these area is less affected by heat and corrosion. Then a warm white followed by a reddish brown was applied using the sponge technique. Next was rust tones painted and blended with enamels. Colors of the original camo scheme where then applied with a sponge in the areas with less corrosion, to turn out the different stages of heat impact. Finally the upper parts received a slightly black shade to simulate the exhaust fume grime.
Thanks, Nick!
The exhaust was painted in a medium grey first. The parts having armor plates underneath were left in the original painting, as these area is less affected by heat and corrosion. Then a warm white followed by a reddish brown was applied using the sponge technique. Next was rust tones painted and blended with enamels. Colors of the original camo scheme where then applied with a sponge in the areas with less corrosion, to turn out the different stages of heat impact. Finally the upper parts received a slightly black shade to simulate the exhaust fume grime.
23 June, 08:21
April 24, 2024
coporado
a adăugat un nou photoalbum.
a adăugat un nou photoalbum.
All comments (27) » 30 4 January, 15:57
coporado
Base colorized and spray added using cotton. Quite happy with the colors, not happy with the overall moulding of the water surface. Bow waves are too steep and the waves generated by the wind are not fitting smoothly into the overall surface. Next is building an appropriate frame to mimic the view from a uboat persiscope.
Base colorized and spray added using cotton. Quite happy with the colors, not happy with the overall moulding of the water surface. Bow waves are too steep and the waves generated by the wind are not fitting smoothly into the overall surface. Next is building an appropriate frame to mimic the view from a uboat persiscope.
24 April, 14:56
March 28, 2024
March 20, 2024
March 9, 2024
March 2, 2024
coporado
a adăugat un nou photoalbum.
a adăugat un nou photoalbum.
All comments (41) » 22 7 February 2020, 06:31
coporado
a adăugat un nou photoalbum.
a adăugat un nou photoalbum.
All comments (64) » 99 6 February 2023, 16:39
February 16, 2024
coporado
a marcat acest articol drept comercializabil / vândut
a marcat acest articol drept comercializabil / vândut
US Naval Doors (1 Photo-Etched sheet)
Tom's Modelworks 1:700
753 16 February, 12:11
coporado
a marcat acest articol drept comercializabil / vândut
a marcat acest articol drept comercializabil / vândut
20mm Oerlikon Single Machine Gun - Stowed Position
Shelf Oddity 1:700
SO700182 16 February, 12:10
coporado
deține acest articol
deține acest articol
20mm Oerlikon Single Machine Gun - Stowed Position
Shelf Oddity 1:700
SO700182 16 February, 12:10
coporado
a marcat acest articol drept comercializabil / vândut
a marcat acest articol drept comercializabil / vândut
3inch/50 Caliber Gun Mk.22 (5pcs)
Niko Model 1:700
ZW7027U 16 February, 12:09
February 6, 2024
January 4, 2024
coporado
vrea acest articol
vrea acest articol
Oerlikon 20mm AA Gun (Single Mount)
FlyHawk Model 1:700
FH760006 4 January, 18:10
coporado
deține acest articol
deține acest articol
Jeremiah O Brien/ John W. Brown Liberty Ship (for Trumpeter 05755/05756)
CRM (Captain Rabbit Models) 1:700
CRM71001 Subiecte multiple (2)4 January, 15:56
December 30, 2023
coporado
vrea acest articol
vrea acest articol
3inch/50 Caliber Gun Mk.22 (5pcs)
Niko Model 1:700
ZW7027U 30 December 2023, 16:01
coporado
vrea acest articol
vrea acest articol
3inch/50 Caliber Gun Mk.22 (5pcs)
Niko Model 1:700
ZW7027U 30 December 2023, 16:01
December 10, 2023
November 3, 2023
October 26, 2023
coporado
a adăugat un nou photoalbum.
a adăugat un nou photoalbum.
All comments (98) » 80 26 November 2021, 15:52
Michael Kohl
May I ask why you don't use copper wire? You might even have it at hand from cable leftovers and the like and it is very malleable.
Apart from that, this tree has the potential to make an excellent diorama even better. I cross my fingers.
May I ask why you don't use copper wire? You might even have it at hand from cable leftovers and the like and it is very malleable.
Apart from that, this tree has the potential to make an excellent diorama even better. I cross my fingers.
19 October 2023, 15:39
coporado
Next stage, tree received 3 runs of structuring material. 1st - Some putty, had nothing else as AK Terrain Effects, worked well to get rid of the wire structure. 2nd - sawdust, more or less in fine graining to achieve more structure. 3rd - very fine soil for the smallest branches at the top. Next is to add the very fine branches.
@Michael: Just didn't came to mind, to use copper wire.
Definetly a hand gently and money saving approach 🙂
Next stage, tree received 3 runs of structuring material. 1st - Some putty, had nothing else as AK Terrain Effects, worked well to get rid of the wire structure. 2nd - sawdust, more or less in fine graining to achieve more structure. 3rd - very fine soil for the smallest branches at the top. Next is to add the very fine branches.
@Michael: Just didn't came to mind, to use copper wire.
Definetly a hand gently and money saving approach 🙂
26 October 2023, 14:30
July 27, 2023
coporado
a adăugat un nou photoalbum.
a adăugat un nou photoalbum.
All comments (18) » 31 8 May 2023, 14:01
Bruce Huxtable
This is going to be gorgeous 🙂 Really liking the textures, colours and staining 🙂
This is going to be gorgeous 🙂 Really liking the textures, colours and staining 🙂
26 July 2023, 16:22
wnolder.php?lang=ro
2023-07-27 08:01:13
2014-03-05 11:06:37
15244
/ajax/wnolder.php?lang=ro&sd=2023-07-27 08:01:13&md=2014-03-05 11:06:37&filter=&w=15244
todo