F9F Panther in Flight.

1
August 21, 2024
I want to build this kit in flight. It's pretty simple but the cockpit detail is decent with some carefull painting.
2
August 21, 2024
This kit is not designed for a in flight build. I added this Airfix 1/72 pilot form the Martlet mk.4 kit. It looks pretty decent from a distance. It will be enough.
I needed to cut some material near the hips and legs to get him to fit the seat. But the cockpit itself has a lot of space so he can keep his legs and feet for ones.
3
August 21, 2024
I primed the cockpit tub with black and painted it dark green. The raised detail is very decent. This make the painting very fun. This kit has no decals for the cockpit. I also fixed the pilot to the seat.
4
August 21, 2024
I modified the landing gear covers to make it possible to close them for the in flight look. Not much is needed and the fit is decent. I used styrine sheet for the modifications.
5
August 21, 2024
Even though the detail is pretty simple I'm happy with the result.
6
August 21, 2024
I added some detail to the cockpit area that will be seen true the canopy.
7
August 24, 2024
I 3d printed a base out of 2 pieces and drilled a hole on the underside of the plane. I will use some clear sprue as a stand.
8
August 24, 2024
I painted the final parts of the cockpit area and masked the canopy frame.
9
August 24, 2024
I want to make a sea base and I saw this technique to make a sea base. Without using resin. I used superglue to on the first layer of foil. This layer consists out of rollled foil and small sheets in between.
After this I added 2 layers of foil over the first layer glued with white glue. I aplied 3 layers of white glue over the final foil layer as a primer and to hide the sharp edges.
10
September 2, 2024
Not bad for a first try. I should have used more green to get a more sea like colour. But I will try this more in the future.
11
September 2, 2024
I preshade the plane with a light blue to compliment the dark blue scheme.
12
September 2, 2024
I like the shading I got. The fule tanks are left off to make the masking of the siver parts easier. I reprimed the silver parts in black.
13
September 2, 2024
I used light valejo metal colour white alluminium to get a almost white silver effect. I really like these paints.
14
September 7, 2024
The decals in this kit are great. But the red nose decals is hard to get right. I needed some red paint to fix the placement.
15
September 7, 2024
I used dark night wash for the silver parts of the plane and grey panelliner form Tamiya for the dark blue parts. I wasn't sure but I wanted to get some contrast going. I also decided to paint the tip of the vertical stabilzer instead of using the decals.
16
September 8, 2024
I do like the faded effect of the grey wash. I laso added a black wash to the airbrake holes.
17
September 8, 2024
I added some more weathring to the walking areas and i Tried a semi-gloss finish. This didn't go very well and the paint finish is not as smooth as i would like. After the weathering I painted the landing lights.
18
September 8, 2024
Fnial parts are added and painted. The masking of the engine parts worked great. The grainy finish can be seen at a close-up. I used silver for the chipping effect and a light blue drybrush for the faded effect and scratches.
19
September 8, 2024
The pilot and other cockpit detail is still visible.
20
September 8, 2024
I finished the model. Very happy with this fast mojo build. I tried some new things and I still have a long way to go on some techniques.
21
September 8, 2024
Final photo's.
22
September 8, 2024
23
September 8, 2024
24
September 8, 2024
25
September 8, 2024
26
September 8, 2024
27
September 8, 2024
28
September 8, 2024
29
September 8, 2024
30
September 8, 2024
31
September 8, 2024
32
September 8, 2024
33
September 8, 2024
34
September 8, 2024
35
September 8, 2024
36
September 8, 2024
37
September 8, 2024
38
September 8, 2024
39
September 8, 2024
The 3d printed base with the alluminium foil water effects.
40
September 8, 2024
41
September 8, 2024
42
September 8, 2024

Comentarii

58 21 August, 20:16

Nicolas
Following

22 August, 18:33

Ekki
And me

22 August, 18:56

DerMattes
Following too.

22 August, 20:07

J35J
Nice progress with the cockpit! Following👍🏻

22 August, 21:13

Vincent
Thanks everyone. If started with the base let see where its going!

22 August, 23:57

Neuling
Good build in cool presentation!

9 September, 07:55

Jan Peters
Very nice indeed 👍🏻👍🏻

9 September, 08:37

Thomas Kolb
Beautiful model and innovative presentation.

9 September, 14:24

P Swizz
Great build! What paint did you use for the blue?

9 September, 14:33

Ekki
Very good work!

9 September, 18:09

Nicolas
Great result.

9 September, 18:33

★ Starfish ★
Lovely!

9 September, 19:01

Vincent
Thanks everyone this was a fun build. @ P Swiss: I used mr.color 328 US NAVY blue Angles. I like that it is a bit lighter compared midnight blue. That works a bit better in this scale.

10 September, 18:50

Łukasz Gliński
Brilliant, love this opaque, slightly weathered look and these scratches 👍

10 September, 19:54

P Swizz
Thanks Vincent, it worked a treat 👍

10 September, 21:21

S M
Pretty Panther well weathered!

9 October, 14:43

Vincent
Thanks everyone!!!

9 October, 18:46

Mark Sherwood
Nice one Vincent 👍🥸🤘

9 October, 19:47

Vincent
Thanks Mark!

10 October, 09:32

Album info

I really like the look of the F9F Panther and wanted to make a in flight diorama like I did with the BF-109e and f-16.
I bit of scratch building is needed to make this kit wheels-up.
- Added a Airfix pilot form the Martlet kit.
- The landing gear covers are modified to be closed.
- Added detail to the gun sight.
- Added detail behind the cockpit.

F9F-3 wheels up.

42 imagini

1:72

terminat

Grumman F9F-3 Panther

US Navy (1794-now)
VF-51 Screaming Eagles 123071 109 S (Lt.(Jg) Leonard H. Plog)
Iulie 1950
Dark sea blue

Toate albumele

Vizualizați toate albumele »