Yak-38
Comentarii
28 March 2013, 21:50
Vitor Costa
You are not going to like it... im almost sure 🙂
É melhor passar ao lado deste! Espere que saia um melhor, este é muito mau 🙂
You are not going to like it... im almost sure 🙂
É melhor passar ao lado deste! Espere que saia um melhor, este é muito mau 🙂
28 March 2013, 22:51
Dimitris P.K.
Beautiful result.
I love this aircraft, and I have the same kit in my stock. It's destined for a whif in the near future.
I won't be using any decals except of the stencils. Are those any good or should I go for aftermarket?
Any other tips for the built? Cheers
Beautiful result.
I love this aircraft, and I have the same kit in my stock. It's destined for a whif in the near future.
I won't be using any decals except of the stencils. Are those any good or should I go for aftermarket?
Any other tips for the built? Cheers
29 March 2013, 11:45
Vitor Costa
Thank you all friends 🙂
Dimitris, this is a very "week" kit in all aspects, wrong (ver wrong) shape, the fit is not the worst but there are some parts that require lots of work to have a good fit (the air fins are all... well very very bad) the front landing gear is a disaster, really, the parts are to large for the wheel and in the finish it will be not centered. The decals are all out of register, all of them so i advice you to get others. The cockpit is almost empty the seat and the control stick is all you get but very bad represented so... ahh the lines VERY deep, i sanded all the aircraft to reduce it but in vain... well to make it a nice reproduction of the real thing the solution is to buy the 1/48 kit 😄 😄 this one is the only one available in this scale and only for that, i think Amodel have one, dont know the kit but probably is better than this one... not very difficult 😄
Thank you all friends 🙂
Dimitris, this is a very "week" kit in all aspects, wrong (ver wrong) shape, the fit is not the worst but there are some parts that require lots of work to have a good fit (the air fins are all... well very very bad) the front landing gear is a disaster, really, the parts are to large for the wheel and in the finish it will be not centered. The decals are all out of register, all of them so i advice you to get others. The cockpit is almost empty the seat and the control stick is all you get but very bad represented so... ahh the lines VERY deep, i sanded all the aircraft to reduce it but in vain... well to make it a nice reproduction of the real thing the solution is to buy the 1/48 kit 😄 😄 this one is the only one available in this scale and only for that, i think Amodel have one, dont know the kit but probably is better than this one... not very difficult 😄
29 March 2013, 12:34
Vitor Costa
Sorry if i said so wrong stuff about this kit but is was really a pain in the $#()/#4 to finish it...
well know is gone time for a little Gnat...
Duncan an Airfix for you 😉
Sorry if i said so wrong stuff about this kit but is was really a pain in the $#()/#4 to finish it...
well know is gone time for a little Gnat...
Duncan an Airfix for you 😉
29 March 2013, 12:35
Dimitris P.K.
Oh, you broke my heart
I'll leave it in my stash then, for when my skills become better. Don't wanna ruin it now.
Thanx for the info, and a critique is a critique despite of it says either bad or good things, as long as it is true.
Cheers again
Oh, you broke my heart
I'll leave it in my stash then, for when my skills become better. Don't wanna ruin it now.
Thanx for the info, and a critique is a critique despite of it says either bad or good things, as long as it is true.
Cheers again
29 March 2013, 13:07
Bill Gilman
How about the Amodel kit? It's newer than the Revell kit, maybe it's a little better? Has anyone built it?
How about the Amodel kit? It's newer than the Revell kit, maybe it's a little better? Has anyone built it?
29 March 2013, 13:14
Guus
I have the 38U from Amodel.
That is to say, the box illustrates a 38M and that is what I thought I had bought but when I opened it it contained the two seater ....
Very nice panel lines but very rough casting with lots of flash and massive sprue gates.
Typical Amodel, some very delicate parts and some chunky lumps of plastic.
Don´t think I´ll ever build it 🙂
I have the 38U from Amodel.
That is to say, the box illustrates a 38M and that is what I thought I had bought but when I opened it it contained the two seater ....
Very nice panel lines but very rough casting with lots of flash and massive sprue gates.
Typical Amodel, some very delicate parts and some chunky lumps of plastic.
Don´t think I´ll ever build it 🙂
29 March 2013, 13:48
Pierre-Christian Baudru
Does anybody know if there is a biplace variation on 1772 scale please ?
Does anybody know if there is a biplace variation on 1772 scale please ?
29 March 2013, 14:06
Dimitris P.K.
As said before, the Yak-38 it's a beautiful single seater aircraft,
Sadly, the -U it's a monstrocity!!! The ugly sister 🙂
As said before, the Yak-38 it's a beautiful single seater aircraft,
Sadly, the -U it's a monstrocity!!! The ugly sister 🙂
29 March 2013, 14:17
Vitor Costa
Well i think that the Amodel is better, at least it looks much more accurate than the "Revell" kit! If anyone is thinking about one... i would go to the Amodel kit
Well i think that the Amodel is better, at least it looks much more accurate than the "Revell" kit! If anyone is thinking about one... i would go to the Amodel kit
29 March 2013, 14:20
Vitor Costa
Thank you Augie and Maarten, i only wish to have one made by Tamiya... Hasegawa, Trumpeter... well a much better kit, because i like the aircraft but i hated the kit 😄
Thank you Augie and Maarten, i only wish to have one made by Tamiya... Hasegawa, Trumpeter... well a much better kit, because i like the aircraft but i hated the kit 😄
29 March 2013, 14:47
Bill Gilman
How about the old Hobby Craft kit? Might be hard to find.
Other choices, like ACE, Tsukuda, and Kangnam are identical to Revell. I believe that mould originated with Tsukuda.
The Scalemates timeline also shows 1:72 kits from Alanger and Interavia (the latter has both single and dual seat versions in the same kit, I think). I've never heard of these last two.
How about the old Hobby Craft kit? Might be hard to find.
Other choices, like ACE, Tsukuda, and Kangnam are identical to Revell. I believe that mould originated with Tsukuda.
The Scalemates timeline also shows 1:72 kits from Alanger and Interavia (the latter has both single and dual seat versions in the same kit, I think). I've never heard of these last two.
29 March 2013, 16:42
Aghis Barberopoulos
The kit must have been ugly, but you did make it shine! Very nice painting and finish Vitor, as we have come to expect from you 😉
The kit must have been ugly, but you did make it shine! Very nice painting and finish Vitor, as we have come to expect from you 😉
29 March 2013, 17:30
Jesús Alcocer
I like it a lot. Really nice model you goy from a very bad kit. Congratulations!
I like it a lot. Really nice model you goy from a very bad kit. Congratulations!
29 March 2013, 18:07
Dirk Heyer
Nice clean built model with skilful paint job! Give`em a truly three dimensional effect! Great!
Nice clean built model with skilful paint job! Give`em a truly three dimensional effect! Great!
29 March 2013, 21:55
Album info
Hello friends
here is the last one from the workbench.
The "Revell" 1/72 kit, well... this is not a very good kit, shape is wrong, poor's and missing details, awful decals, hard and off registration... well i didn't like this one at all, lots of work to make it "shine" a little bit.
I have made some scratch in the cockpit because this one was almost empty...
well the pictures... the pictures will show some of the points i mentioned before.
I hope you like it, well more than i did 🙂 🙂