Brewster 339E Buffalo Mk. I (Special Hobby)
Comentarii
1 18 February 2015, 02:28
Bill Gilman
Hi mates, I've started a photo album for my latest project (which is almost finished). I've been working on it for a month. It's the oh-so-cute tubby little Brewster Buffalo in RAF/RAAF markings. I chose the Special Hobby kit because of the great resin detail parts. Have look and enjoy! Cheers, Bill
Hi mates, I've started a photo album for my latest project (which is almost finished). I've been working on it for a month. It's the oh-so-cute tubby little Brewster Buffalo in RAF/RAAF markings. I chose the Special Hobby kit because of the great resin detail parts. Have look and enjoy! Cheers, Bill
18 February 2015, 03:03
Matthias Weiss
That's a lovely little bugger... I like the buffalo!
Well done, sir,
That's a lovely little bugger... I like the buffalo!
Well done, sir,
18 February 2015, 03:21
Hanno Kleinecke
Excellen t work as usual, Bill ! How do you achieve this tremendous depth in detail with the instruments in the panel, are they decals or do you paint them freehand ? I`m a bit envyous......😢
Excellen t work as usual, Bill ! How do you achieve this tremendous depth in detail with the instruments in the panel, are they decals or do you paint them freehand ? I`m a bit envyous......😢
18 February 2015, 10:04
Bill Gilman
Thanks, mates! 🙂
Guido - no tape residue. I used the Tamiya tape.
Hanno - the instrument panel is a combination of decals and freehand painting. The instrument faces and dials are decals that I applied individually to match the detail in the resin.
Thanks, mates! 🙂
Guido - no tape residue. I used the Tamiya tape.
Hanno - the instrument panel is a combination of decals and freehand painting. The instrument faces and dials are decals that I applied individually to match the detail in the resin.
18 February 2015, 17:26
Dirk Heyer
Nice and clean built, like always, Bill!! 🙂
The fat barrel is on my to do list too!
It is always a pleasure to watch your builts!
I have both volumes of "Bloody Shambles" from Christopher Shores, Brian Cull and Yasuho Izawa in my stash. Just incredible what these RAAF/RAF/RNZAF and Dutch Pilots have undergone to fight against an overwhelming opponent and modern fighters like the Zero and Hayabusa.
Your model represents W8209/F, Squadron No.453 / Kuala Lumbur of Sgt. Mac Read, KIA, ......"last seen apparently ramming or crashing into an opponent as he went down......." This happened on Monday, 22. December, one of the big air battles over Malaya. Btw, the opponent that day was the 64.Sentai with Ki-34 Hayabusa fighters led by Major Tadeo Kato. The battle lasted for over 30 minutes and 15 Buffalos fought against 18 Hayabusas with heavy losses for Squadron No.453.
Cheers Dirk
Nice and clean built, like always, Bill!! 🙂
The fat barrel is on my to do list too!
It is always a pleasure to watch your builts!
I have both volumes of "Bloody Shambles" from Christopher Shores, Brian Cull and Yasuho Izawa in my stash. Just incredible what these RAAF/RAF/RNZAF and Dutch Pilots have undergone to fight against an overwhelming opponent and modern fighters like the Zero and Hayabusa.
Your model represents W8209/F, Squadron No.453 / Kuala Lumbur of Sgt. Mac Read, KIA, ......"last seen apparently ramming or crashing into an opponent as he went down......." This happened on Monday, 22. December, one of the big air battles over Malaya. Btw, the opponent that day was the 64.Sentai with Ki-34 Hayabusa fighters led by Major Tadeo Kato. The battle lasted for over 30 minutes and 15 Buffalos fought against 18 Hayabusas with heavy losses for Squadron No.453.
Cheers Dirk
18 February 2015, 19:53
Bill Gilman
Hi Dirk, thanks for the nice comments. Sgt. Read flew the plane I'm modelling, but he died in a different aircraft. When I get home I can post the serial number.
W.8209 (there is a decimal point between the W and the😎 was coded TD-E. The kit decals were TD-F, and I had to modify them. Surviving logbooks from 453 Squadron show that TD-F was a different aircraft. There is a movie at the IWM that shows my plane during an inspection, and it's TD-E.
I have to read Bloody Shambles, I've heard from several people that it is really good. I'm currently reading Buffaloes Over Singapore, which is also by Brian Cull. You are right, it is incredible what these guys did.
The research part is almost as fun as building the model! I have the Dutch Buffalo to build along with the US Marines (Midway), the Finnish model 239, and US Navy (Yellow Wings). That will make a nice little collection! Cheers, Bill
Hi Dirk, thanks for the nice comments. Sgt. Read flew the plane I'm modelling, but he died in a different aircraft. When I get home I can post the serial number.
W.8209 (there is a decimal point between the W and the😎 was coded TD-E. The kit decals were TD-F, and I had to modify them. Surviving logbooks from 453 Squadron show that TD-F was a different aircraft. There is a movie at the IWM that shows my plane during an inspection, and it's TD-E.
I have to read Bloody Shambles, I've heard from several people that it is really good. I'm currently reading Buffaloes Over Singapore, which is also by Brian Cull. You are right, it is incredible what these guys did.
The research part is almost as fun as building the model! I have the Dutch Buffalo to build along with the US Marines (Midway), the Finnish model 239, and US Navy (Yellow Wings). That will make a nice little collection! Cheers, Bill
18 February 2015, 22:43
Bill Gilman
Latest pictures are posted. I keep finding some other little fiddly thing that needs to be done, but it is very close to being finished! 🙂
Latest pictures are posted. I keep finding some other little fiddly thing that needs to be done, but it is very close to being finished! 🙂
26 February 2015, 01:54
Bill Gilman
Hi Holger - you are right, it has been quick. But it's a small model, not many parts! 🙂
Hi Holger - you are right, it has been quick. But it's a small model, not many parts! 🙂
27 February 2015, 01:13
Bill Gilman
Thanks, mates! There are still a few things to finish. Last night I did the landing lights on the underside of the wings. I put some photoetched landing lights into the holes in the wings, and then sealed them in with Future (Kleer) to represent the lens. I think it looks pretty good. I'll get a picture soon.
Thanks, mates! There are still a few things to finish. Last night I did the landing lights on the underside of the wings. I put some photoetched landing lights into the holes in the wings, and then sealed them in with Future (Kleer) to represent the lens. I think it looks pretty good. I'll get a picture soon.
27 February 2015, 17:26
Bill Gilman
The Buffalo is finished! I added the landing lights, the aerial wire and lead-in, plus I added a decal for the gas patch as well as the sealing over the gun camera port. Not my best work, but I will remember it as my chemo-bird, built while I was having my cancer treatments. I've added several more photos to show the final work. The very last photo shows the Buffalo and my recent Beaufort, both with Snifter nose art. 🙂
The Buffalo is finished! I added the landing lights, the aerial wire and lead-in, plus I added a decal for the gas patch as well as the sealing over the gun camera port. Not my best work, but I will remember it as my chemo-bird, built while I was having my cancer treatments. I've added several more photos to show the final work. The very last photo shows the Buffalo and my recent Beaufort, both with Snifter nose art. 🙂
1 March 2015, 21:35
John E
That looks like a beautiful kit and you have done marvelous work with it. The scheme is great. We should all remember those brave men.
That looks like a beautiful kit and you have done marvelous work with it. The scheme is great. We should all remember those brave men.
2 March 2015, 00:22
John Bollig
wow, Bill I have the matchbox and airfix buffaloes. I have built them years ago. yours is a great build wow
wow, Bill I have the matchbox and airfix buffaloes. I have built them years ago. yours is a great build wow
2 March 2015, 04:17
Soeren R.
The Buffalo is really a great nice plane! I ve two Hasegawa combos in my stash and I think I will build one Finland version soon 🙂
The Buffalo is really a great nice plane! I ve two Hasegawa combos in my stash and I think I will build one Finland version soon 🙂
2 March 2015, 06:24
Ulf Petersen
Phantastic art, Bill!👍 I am glad to see your output increase. Keep on!
Phantastic art, Bill!👍 I am glad to see your output increase. Keep on!
2 March 2015, 06:59
Jens
which is made class without telling the scale, I would have thought it a '48 model 👍 👍 👍
which is made class without telling the scale, I would have thought it a '48 model 👍 👍 👍
17 February 2018, 18:12
Cuajete
Very nice "Buffie" and Albemarle looks very good. Does the Buffalo's assembly have any difficulty?
Very nice "Buffie" and Albemarle looks very good. Does the Buffalo's assembly have any difficulty?
17 February 2018, 19:46
Bill Gilman
Thanks mates. It's always fun to have an old thread revived. I was just dusting this model the other day! 🙂
@Cuajete, for a more detailed look at the building of this Buffalo, see my WIP thread here:
britmodeller.com/for..rewster-buffalo-mki/
This reminds me, I still have more of these to build - USN F2A-1 (yellow wings), USMC F2A-3 (Midway), Finland B-239, and Netherlands B-339. Cheers, Bill
Thanks mates. It's always fun to have an old thread revived. I was just dusting this model the other day! 🙂
@Cuajete, for a more detailed look at the building of this Buffalo, see my WIP thread here:
britmodeller.com/for..rewster-buffalo-mki/
This reminds me, I still have more of these to build - USN F2A-1 (yellow wings), USMC F2A-3 (Midway), Finland B-239, and Netherlands B-339. Cheers, Bill
18 February 2018, 18:52
Cuajete
Many thanks, Bill. Checked. When I said Albemarle, I meant to say Beaufort. Sorry.
Many thanks, Bill. Checked. When I said Albemarle, I meant to say Beaufort. Sorry.
18 February 2018, 20:04
Album info
This kit represents a Buffalo Mk. I from 453 Squadron, flown by very brave RAAF pilots in the defence of Singapore. The build will be pretty much out-of-the-box, since the kit comes with some highly detailed resin components.