Mini Art's "A Dispatch rider asleep on his motorcycle".
To begin with, it was the box art that made me want to get these kits in a series, as it is a subject that no other manufacturer has addressed and the detail will not disapoint those who build them.
And, for the record, this one is sure to be the image used for the box art. 🙂
After trolling through hundreds of images, I found one that looks similar to the box art. 🙂
Like the pits at Datona 100 of the 40's hehehe. 🙂 and an idea for a dio me thinks. 👍
The etched brass items are some of the most delicate I have ever seen, right down to the "Wing nuts" for the clamps on the battery terminals.
These items are found attached to the "A" runner and are compatable with all the other model of the series.
As the two parts are squezed together, the spokes will get lodged in the lower half of the tool and extreme care needs to be taken to remove it without any damage.
Squeezing very hard is the best way to get the brass to take it's new shape.
To remove the spokes takes some very careful work, as it is just so easy to deform the item if going too carelessly at lifting the edges from the tool where it will become lodged.
A small number of ejector pin marks will have to be removed here, as they will prevent a perfect marrage of the surfaces when glued together.
I have used the Tamiya super glue dispenser to govern how much glue reaches the parts I want anchored, and as you can see, it is the middle ring that gets the spokes fitted first.
The diamiter of the holes on the centre of both wheel spokes are totally different, so pay close attention to which is which.
These ejector pin marks inside the rims here were quit large and would have prevented the mating of the rims difficult.
The tread pattern of the tyers will all interlock perfectly if the locater pins fit to the holes , otherwise there will be no match.
Both the front and rear wheels are now ready for the relative hub centers to be fitted.
Pay attention to every wrinkle and bend otherwise it will not fit well at all.
The instructions are well laid out and clear to follow, with colour coded graphics denoting the action to be taken.
Like all models, there will be a small amount of clean up, but with this kit there seems to be virtually none, but I am just pedantic about getting rid of anything that would detract from the finish.
It is by no means, a big item, and handling all these small parts can only be done one way. That is with care and patience and a bloody sharp blade.
The upper torso with hands clasped.
The "Pose" is hard to get right as there is very little 'space' to play with.
All finished except the head, which will have to be on a slight turn and chin down position.
Like so. 🙂
These front fork equipment support frames are so hard to get exactly right, but I did my very best to do it. 🙂
They went on without a hitch.
This is the gear lever knob, and I had to get some drilling done to make sure the lever would fit. :-/
The mechanics are a great build, and in the following images, you will see the potential for a great diorama. 🙂
Comentarii
15 November 2015, 19:35
Kerry COX
The box art is very convincing and is what will inspire a modeller to get and build these most excellent kits.
The box art is very convincing and is what will inspire a modeller to get and build these most excellent kits.
15 November 2015, 19:49
Kerry COX
I am sure there is a photograph of exactly this scene somewhere on file. for sure. 🙂 👍
I am sure there is a photograph of exactly this scene somewhere on file. for sure. 🙂 👍
15 November 2015, 20:21
Kerry COX
Es-haq, thanks my friend, and I have several of these kits a great lot of potential for a diorama.:-O
Es-haq, thanks my friend, and I have several of these kits a great lot of potential for a diorama.:-O
15 November 2015, 21:43
Rui S
Hi, Kezza.
Nice review on these great kits. Do you find them expensive?
You don't need any aftermarket item for a great OOB job with this ones.
So 👍 for MiniArt
Hi, Kezza.
Nice review on these great kits. Do you find them expensive?
You don't need any aftermarket item for a great OOB job with this ones.
So 👍 for MiniArt
16 November 2015, 15:40
Kerry COX
Rui.My kits cost on average, $30.00 Au, but I see on the web, twice that much is being asked. WHY.?
bnamodelworld.com/mi..liceman-w-motorcycle
Rui.My kits cost on average, $30.00 Au, but I see on the web, twice that much is being asked. WHY.?
bnamodelworld.com/mi..liceman-w-motorcycle
16 November 2015, 17:34
Rui S
I was asking for your feeling about quality/price relation.
I see that it cost 16,95€, in MBK.
I was asking for your feeling about quality/price relation.
I see that it cost 16,95€, in MBK.
16 November 2015, 17:52
Kerry COX
Ah, my misunderstanding.
The quality of the kits/detail is worth the price for me here, but overseas, they seems to be overpriced.
Ah, my misunderstanding.
The quality of the kits/detail is worth the price for me here, but overseas, they seems to be overpriced.
16 November 2015, 18:40
Wayne Hale
$24.00 at Sprue Brothers in U.S. store.spruebrothers.com/product_p/mia35176.htm
$24.00 at Sprue Brothers in U.S. store.spruebrothers.com/product_p/mia35176.htm
16 November 2015, 18:48
Kerry COX
Wayne, That is good value if you live there, but as always, the exchange rate and the postage and handling make it all average out to 30/35 no matter where you live.:-/
But as I said to Rui, the quality and detail in these Mini Art kits really is something good. 🙂
Wayne, That is good value if you live there, but as always, the exchange rate and the postage and handling make it all average out to 30/35 no matter where you live.:-/
But as I said to Rui, the quality and detail in these Mini Art kits really is something good. 🙂
16 November 2015, 19:49
Arne Greve
Hi Kerry, I´m really happy about your step-bye-step. I have the motorcycle since years on my bench, but I stop the working on the cylinder, because they are don´t fit. Well, now I saw, you cut them. Easy. I will "my" cut too, so I can work on the Harley.
Thanks for that!
Hi Kerry, I´m really happy about your step-bye-step. I have the motorcycle since years on my bench, but I stop the working on the cylinder, because they are don´t fit. Well, now I saw, you cut them. Easy. I will "my" cut too, so I can work on the Harley.
Thanks for that!
17 November 2015, 09:35
Kerry COX
Arne, I am pleased I could help in some small way. 🙂
I am really happy with the way things have gone, but like all kits, some things just don't fit. LOL 👍
Arne, I am pleased I could help in some small way. 🙂
I am really happy with the way things have gone, but like all kits, some things just don't fit. LOL 👍
17 November 2015, 11:59
Kerry COX
The mechanics need painting and the Harley is just about ready for the paint shop too. :-0
The mechanics need painting and the Harley is just about ready for the paint shop too. :-0
17 November 2015, 22:56
Album info
A Dispatch rider asleep on his vehicle is an other part of Mini Art's 1/35 WLA bike series, and it's an exciting thing, as it is basically the exact same bike but with different figures doing different things, making for a great diorama of a garage in the field with a lot of "Activity", and taking into consideration my first effort was a bit rough, I have this time done everything as exactly as instructed.