B-52H Stratofortress - wip
Comentarii
56 3 May 2021, 14:10
Daniel Mysak
Finished the tail cone of the BUFF, now it will fit an early -H model. Next step will be the cockpit section where some panel lines are missing too.
Finished the tail cone of the BUFF, now it will fit an early -H model. Next step will be the cockpit section where some panel lines are missing too.
13 May 2021, 18:48
Daniel Mysak
Finishet the FLIR/TVcamera fairings, started to add missing panel lines.
Finishet the FLIR/TVcamera fairings, started to add missing panel lines.
30 May 2021, 15:30
Daniel Mysak
After finishing the cockpit area, I continued amidships where some details need to be revised.
After finishing the cockpit area, I continued amidships where some details need to be revised.
2 June 2021, 20:26
Bernd Korte
You're doing a lot of "home improvement" on this kit, hats off! Do you already know where you will keep/display the finished model?
You're doing a lot of "home improvement" on this kit, hats off! Do you already know where you will keep/display the finished model?
12 June 2021, 09:16
Daniel Mysak
Thanks Stefan and Bernd.
...and, no, I got absolutely no clue where to display the finished BUFF. 🙂
Thanks Stefan and Bernd.
...and, no, I got absolutely no clue where to display the finished BUFF. 🙂
13 June 2021, 11:26
Sven Schönyan
Sollte ich meine B-52 mal bauen, werde ich die Holme verstärken und auf der Unterseite Gewindeeinsätze für M2 oder M3 Senkkopfschrauben vorsehen, damit ich die Flügel zum Transport oder zum Verstauen lösen kann. Daß dann auf der Oberseite an der Trennung ein Spalt sein wird, nehme ich in dem Fall in Kauf.
Sollte ich meine B-52 mal bauen, werde ich die Holme verstärken und auf der Unterseite Gewindeeinsätze für M2 oder M3 Senkkopfschrauben vorsehen, damit ich die Flügel zum Transport oder zum Verstauen lösen kann. Daß dann auf der Oberseite an der Trennung ein Spalt sein wird, nehme ich in dem Fall in Kauf.
13 June 2021, 12:26
Daniel Mysak
Die Idee mit abnehmbaren Tragflächen hatte ich auch schon, mal sehen ob ich das weiter verfolge, werd ich dann entscheiden, wenn ich soweit bin.
Die Idee mit abnehmbaren Tragflächen hatte ich auch schon, mal sehen ob ich das weiter verfolge, werd ich dann entscheiden, wenn ich soweit bin.
13 June 2021, 12:36
Gary Victory
Really nice start on your BUFF. Unfortunately this kit and the Italeri releases both have issues with accuracy. Your attention to detail is fantastic and love the stressed skin effect. Looking forward to the rest of your build Daniel.
Really nice start on your BUFF. Unfortunately this kit and the Italeri releases both have issues with accuracy. Your attention to detail is fantastic and love the stressed skin effect. Looking forward to the rest of your build Daniel.
15 June 2021, 06:33
Daniel Mysak
Thanks Gary. Yes, your right with the weak details. I expected way more from this kit, it's a bit disappointing.
Thanks Gary. Yes, your right with the weak details. I expected way more from this kit, it's a bit disappointing.
21 June 2021, 17:36
Andy Ball
I'd like to follow, please. This one intrigued me compared to the older 72nd moulds.
I'd like to follow, please. This one intrigued me compared to the older 72nd moulds.
21 June 2021, 18:52
Daniel Mysak
Thx guys 👍
@Andy yeah, Modelcollect is probably the better choice, even if there are weaknesses in some details.
@Lukas ...our monthly modeller meeting 😉
Thx guys 👍
@Andy yeah, Modelcollect is probably the better choice, even if there are weaknesses in some details.
@Lukas ...our monthly modeller meeting 😉
22 June 2021, 12:59
Daniel Mysak
Moved on with the huge weapon bay of the BUFF. The rotary launcher will not be installed as I will build my B-52 carrying the AGM-129 which was only mounted on the wing pylons.
Moved on with the huge weapon bay of the BUFF. The rotary launcher will not be installed as I will build my B-52 carrying the AGM-129 which was only mounted on the wing pylons.
1 July 2021, 17:10
John
Great work so far. I built an old Monogram BUFF when I was a kid and even in 1/72 scale, they are big kits.
Great work so far. I built an old Monogram BUFF when I was a kid and even in 1/72 scale, they are big kits.
3 July 2021, 15:38
Alexander
Definitely some great progress reagarding the surface rework and also the detailwork in the cockpit - really eager to see how everything will turn out in the end, so I'll stay here until then! 👍
Definitely some great progress reagarding the surface rework and also the detailwork in the cockpit - really eager to see how everything will turn out in the end, so I'll stay here until then! 👍
4 July 2021, 10:10
Daniel Mysak
@John G thanks, yeah, the BUFF is a big bird in this scle, have to look for a place to display it soon.
I´ve always looked at the kits of the B-52 in the hobby shop, ut never bought one in my early modelling days.
@John G thanks, yeah, the BUFF is a big bird in this scle, have to look for a place to display it soon.
I´ve always looked at the kits of the B-52 in the hobby shop, ut never bought one in my early modelling days.
4 July 2021, 10:40
Daniel Mysak
@Alexander thank you, I hope the surface will turn out the way I imagined it at the beginning, but we will see. 🙂
@Alexander thank you, I hope the surface will turn out the way I imagined it at the beginning, but we will see. 🙂
4 July 2021, 10:43
Treehugger
Btw, you might want to check out the HBO tv-movie By Dawn's Early Light (1990) (With James Earl Jones and a few other familiar faces like Rebecca De Mornay).
Btw, you might want to check out the HBO tv-movie By Dawn's Early Light (1990) (With James Earl Jones and a few other familiar faces like Rebecca De Mornay).
19 August 2021, 17:20
Daniel Mysak
Thanks guys.👍
@Treehugger @David Taylor watched the film these days, good story, not so good acting 😉
Thanks guys.👍
@Treehugger @David Taylor watched the film these days, good story, not so good acting 😉
24 August 2021, 18:06
Daniel Mysak
Started the work on the engines, thanks to the poor details there is a lot to do...
Started the work on the engines, thanks to the poor details there is a lot to do...
30 August 2021, 16:54
Treehugger
Re. photo 56. Did you plan to do more with the burred out lines on the sides, or did you maybe forget about them? A stressed metal effect I think it must be.
Re. photo 56. Did you plan to do more with the burred out lines on the sides, or did you maybe forget about them? A stressed metal effect I think it must be.
31 August 2021, 07:31
Daniel Mysak
@Gary thx👍
@Treehugger the stressed skin is already done on the whole fuselage but it´s a bit hard to see in the pictures.
@Gary thx👍
@Treehugger the stressed skin is already done on the whole fuselage but it´s a bit hard to see in the pictures.
31 August 2021, 10:22
Daniel Mysak
If you mean the engine nacelles, they are only hold together by the clamp, the fitting will be not so bad when glued.
If you mean the engine nacelles, they are only hold together by the clamp, the fitting will be not so bad when glued.
31 August 2021, 15:18
Daniel Mysak
After a while I managed to get on with the engines, after control painting, filling, sanding, painting, filling and again sanding, I´m near to the end with them.
After a while I managed to get on with the engines, after control painting, filling, sanding, painting, filling and again sanding, I´m near to the end with them.
22 November 2021, 18:02
Treehugger
Btw, a small brush is very handy when working with sanding to clean out panel lines filled with plastic dust. Tamiya is selling one, but I also bought a cheap make up brush for this purpose.
Btw, a small brush is very handy when working with sanding to clean out panel lines filled with plastic dust. Tamiya is selling one, but I also bought a cheap make up brush for this purpose.
6 December 2021, 17:55
Daniel Mysak
@Treehugger I use an old toothbrush for this purpose, also works very well.
@Treehugger I use an old toothbrush for this purpose, also works very well.
16 December 2021, 15:42