German Luftwaffe | Junkers Ju 87G-2 Stuka 'Rudel'
Comentarii
47 4 June 2023, 16:09
Jos JansenHello mates, I need a quick win...I need the smell of glue and paint so hard...so I've decided to build this beauty instead of finishing my 'bug'...stay tuned mates 🙂 !
4 June 2023, 16:12
Jos JansenWelcome guys.... haha don't worry Mark, it's just an in between...😉, I just need to do something completely different...👊🏻
4 June 2023, 18:52
Sergej INow you're just copying Slavo 😄
But I feel you, I would too build a Würger or two to find my jet mojo 👍
Looking forward to this one 🙂
4 June 2023, 20:32
Jos JansenYou're probably right Sergej I, but I have to found my mojo somewhere... 😁, Slavo has the same problem I think...?!! 😉
4 June 2023, 21:21
Jos JansenThe start of the cockpit has been painted in Gunze RLM66 Dark Gray, and the first dry-brush tire black has been done. The next step is to place the photo etch, then dry brush again with aluminum. Quick boost has some nice detailed exhausts in resin, great!
4 June 2023, 21:22
Jos JansenPit is almost ready, I added some Gun Metal pigment...looks nice and worn. Now everything is sprayed in Gunze clear, this upcoming days some washes. It's fun to build a WWII plane...😁!
9 June 2023, 15:22
Jos JansenThanks Erik...next step, I closed the fuselage and dipped the canopy parts in the Future for a beautiful clear result.
13 June 2023, 17:06
Jos JansenNice cannon barrels from Master...👍🏻, this bird is ready for Mr. Finishing Surfacer 1500 Black...😁!
1 July 2023, 17:35
Jos JansenAfter the primer I started with the pre-shading white marbling technique, after that I added the basic color, Gunze H64 RLM71 Dark Green in a few very thin layers.
2 July 2023, 14:50
Jos JansenThx Erik...this afternoon I added the second basic color H65 RLM70 Black Green...then I will add highlights with the same colors mixed with strongly diluted white and yellow paint...
7 July 2023, 20:07
Jos JansenStarting with one of my favorite painting techniques...Black-Basing, this is still an awesome technique and a lot more controllable than basic pre-shading...
21 July 2023, 12:17
AlbertoI very much like the paint job. How much do you thin this paint and what pressure do you use? I've been struggling to get it right with Gunze
22 July 2023, 05:49
Jos Jansen@Guillaume...me too 😁!
@Alberto...many thx, you'll get the best results with a 0.2 mm nozzle and between 15-20 psi for Gunze and I thin Gunze paints with 50/50 ratio Mr. Color Leveling Thinner...that's my experiences and my way to do this to get these results.
@Rui...thx!
22 July 2023, 15:20
AlbertoThanks for the info Jos, I'll do it like that next time and hope mine looks half as nice as yours 👍
22 July 2023, 17:32
Jos JansenYou're welcome Alberto...I posted the last picture before I leave for a vacation to Shouth-Turkey.
22 July 2023, 23:38
Jos JansenBack from my vacation and due to the horrible weather currently in The Netherlands, enough time to do some modeling...👍🏻! I did some post-shading and airbrushed the yellow markings. I closed everything with a Gunze clear coat...next step, some slightly sanding and then the decals...
2 August 2023, 21:30
Jos JansenUnfortunately, something went terribly wrong with sealing the decals. 😡 The Stuka took a dive towards the waste bin, I was completely done with it. I'm going to close this project, which is a shame because I was almost done! Stay tuned as I continue with my Super Hornet which is also almost ready.
12 October 2023, 04:45
Pierre Pierresorry about that. It happened to me as well. only option forget about it was and start fresh.
12 October 2023, 04:59
Gary KitchenJos save yourself some heartache and recover the cockpit and the gun pods/ barrels for sure 👍
12 October 2023, 06:10
Spanjaardif not yet in the bind, you can give it a layer of one of those white washable paints, winter temporary camo. if does look good, great, if not, nothing to lose if you are going to bin it anyway.
12 October 2023, 12:50
Erik LeijdensBummer Jos!! But what Gary says, maybe you can save some parts for a future Stuka?
12 October 2023, 13:27
Ben MThe issue is the faint white ? I've owned plenty of cars that oxidized out like that... not uncommon for paint. I don't think it's an issue at all, unless you're set on a factory showroom stuka 🙂
12 October 2023, 16:05
Jos JansenThank you for all the support and well-intentioned options to make something of this Stuka 👍🏻. Unfortunately, that won't work anymore, I have already crushed it and thrown it into the garbage bin, I was completely done with it. It was my own mistake in deviating from my beloved Gunze Clear coat. I still had a bottle of Ammo, Gloss Lucky Varnish...what a mess that is 😡! Irreparably messed up, in combination with the fact that I also had the pressure in my compressor wrong and my airbrush gun had problems. Nevertheless, guys, I am already over the first frustrations 😅... the positive thing is that I am now going to finish my Super Hornet, because it will go on the show table of our club during the ESM in Houten, The Netherlands on November 25...👊🏻😎!
US Navy | Boeing F/A-18E Super Hornet 168913 / 303 | Project by Banshee13 (1:48)
WIP US Navy | Boeing F/A-18E Super Hornet Golden Warriors | Album by Banshee13 (1:48)
12 October 2023, 18:38
Patrick HagelsteinNoooooooooooooh!!!!!!….. 😱 Well, I hope the Super Bug turns out better than this one. I'll have a peek at it in Houten then. ☺️ No Veldhoven this weekend?
13 October 2023, 11:46
DuperScaleI feel you, had a problem with my eurofighter and the clear varnish destroyed the color. 😐
13 October 2023, 21:25
ZHOU KunReally sorry to hear of the accident. I had a close call when building my Crusader, decal issues too...
22 March, 12:38
Never a ProReally big respect for publishing failures. We all do. It is humbling and teach us more lessons than successes. I still think it was salvageable, but I am stubborn as a mule and don't accept defeat against plastic, but I am not on the right here. Good luck pn the next build.
22 March, 17:43
