scalare baze de date de modelare | manager de rezervă
BruceH
Bruce Huxtable (BruceH)
GB

SD Kfz 1. Type 170 VK

Comentarii

37 2 July 2023, 08:34
Bruce Huxtable
Welcome, Pietro.
2 July 2023, 16:59
Bruce Huxtable
There's a long way to go on this one, Villers, Plenty of tiny door handles to keep away from the carpet monster 😉
4 July 2023, 12:13
Villiers de Vos
Very nice detailed work.
4 July 2023, 17:46
Bruce Huxtable
Many thanks, Villiers. Still lots to be done, but I surprised myself with the dashboard dials. It looks better than my previous efforts with decals!
4 July 2023, 19:29
Doubtingmango
Nice interior!
22 July 2023, 19:38
Bruce Huxtable
Many thanks, Doubtingmango. I've been working on the doors, and have to decide how open, or how closed the car will be. Lot's of options with this kit. I may have the bonnet half open, so the engine is on view....it all depends if I dare to try to add wiring to the spark plugs!
22 July 2023, 20:38
Doubtingmango
Go for it!
22 July 2023, 23:49
Bruce Huxtable
Well, I've made a start on the wiring. Bodywork also being progressed.
23 July 2023, 17:34
Guy Rump
Looking good. 👍
23 July 2023, 17:45
Bruce Huxtable
Many thanks, Guy. I'm in awe at how others have taken on all the wiring and cables on a 1:35 motor cycle. These cable are all accessible, but it is just soo tricky! I'm going to lie down in a dark room now.
23 July 2023, 17:54
Doubtingmango
Looking good!
23 July 2023, 18:19
Bruce Huxtable
Many thanks, Doubtingmango. Lot's of tiny components still waiting, for adjustable wing mirrors, etc. Even smaller items for bonnet catches.
23 July 2023, 19:49
Pepe
Estoy expectante
29 July 2023, 18:09
Daniel Klink
Very nice progress Bruce!!!👍
29 July 2023, 20:50
Bruce Huxtable
Stil lots to do, Daniel, but I'm learning lots on this journey 😉
29 July 2023, 21:20
Villiers de Vos
Very nice and organized.
30 July 2023, 06:49
Bruce Huxtable
It's the countdown to completion, Villiers. All tricky, fragile or tiny parts.....
30 July 2023, 07:51
Bruce Huxtable
Okay, so I have a problem to solve. Having mounted the bodywork onto the chassis, I noticed that the four wheels are not sitting evenly. There seems to be a twist in the set up on the chassis, so I have taken the body off again, and need to figure out how to straighten things up again.
1 August 2023, 06:52
Robert Podkoński
How have I missed this??? Joining the party! Rust looks fabulous, Bruce!
1 August 2023, 09:55
Villiers de Vos
I would like to suggest two methods: 1) Hairdryer and gently twist the chassis, or; 2) wedge in a thin shim on one side between the chassis itself and the leaf spring.
1 August 2023, 12:26
Doubtingmango
I can feel that rust flaking off onto my hands! Great effect!
1 August 2023, 14:55
Bruce Huxtable
Welcome, Robert. What else is there to do with a spare bonnet and grill 😉
1 August 2023, 15:13
Bruce Huxtable
Many thanks for your advice, Villiers. I'll try the second option. Two steps back, before things can move forward again. The fragile last parts will have to wait!
1 August 2023, 15:15
Bruce Huxtable
Many thanks, Doubtingmango. I think I surprised myself! 😉
1 August 2023, 15:16
Bruce Huxtable
The windscreen glass panes are a slightly loose fit in the frames, (with no rebates to fit into...), but a coat of dark grey inside the frames and on the edges of the glass has made the fit finger tight. White glue applied, and the glass fitted.
1 August 2023, 15:19
Bruce Huxtable
Final problems resolved, fine parts installed, decals added, and some last small details painted.
6 August 2023, 14:24
Bruce Huxtable
Welcome, John.
6 August 2023, 14:45
Bruce Huxtable
Many thanks for your 'likes', everyone. I hope you like the end results too?
6 August 2023, 16:46
Bruce Huxtable
You were right, Villiers. I needed to fit a small packer between the springs and chassis, and that did the trick 👍 Many thanks 🙂
6 August 2023, 18:52
Bruce Huxtable
Finished, unless I spot something in the piccies 😉
8 August 2023, 15:18
Guy Rump
Great result Bruce! 👍
8 August 2023, 16:25
Pietro De Angelis
Very very nice, congrats!
8 August 2023, 16:41
Bruce Huxtable
Many thanks for your generous feedback, Guy and Pietro. An easy one next, then something even more challenging....
8 August 2023, 18:47
Bruce Huxtable
I need your maintenance team, Ian 😉
8 August 2023, 19:23
Doubtingmango
Great finish! Motivating me to try my first softskin
8 August 2023, 21:40
Villiers de Vos
Very nice work.
9 August 2023, 02:12
Bruce Huxtable
Many thanks, Villiers and Doubtingmango. There are lots of wheeled vehicles to combine with armour, DM. Have fun!
9 August 2023, 06:20
Bruce Huxtable
Many thanks for your 'likes', everyone. There are a few areas that I can see could be improved, so I'll take these lessons on to the next one 🙂
9 August 2023, 07:44

Album info

A Masterbox kit heavily discounted. The plastic is very brittle, so I'm having nightmares with fine parts shattering....

58 imagini
1:35
In progres
1:35 Kfz. 1 Type 170VK (Master Box MB3530)

Toate albumele

Vizualizați toate albumele »