newsfeed
Sam Croft
pridal nový fotoalbum.
pridal nový fotoalbum.
4 14 October, 20:05
Sam Croft
Thanks, I am learning to weather aircraft. I used a light grey oil wash over the Glossy Blue paint. I am very happy with the results.
Thanks, I am learning to weather aircraft. I used a light grey oil wash over the Glossy Blue paint. I am very happy with the results.
14 October, 20:22
Kalle Kindel
pridal nový fotoalbum.
pridal nový fotoalbum.
1 14 October, 21:22
Matti Thomaes
Nice build, interesting subject. Never even heard of this smal flying boat. Seems very smal to be boasting six engines.
Nice build, interesting subject. Never even heard of this smal flying boat. Seems very smal to be boasting six engines.
14 October, 21:36
gorby
pridal nový fotoalbum.
pridal nový fotoalbum.
10 snímky
The Gorby sanctuary resurrection.The extractor is in the corner because of the bulging bit at the back, but it has the added advantage of allowing me to ...
12 7 July 2019, 10:34
gorby
Thanks mate, it's a much nicer place to work so it was worth the effort. It's not so tidy now.
Thanks mate, it's a much nicer place to work so it was worth the effort. It's not so tidy now.
9 August 2019, 16:07
Spanjaard
looking good gorbygould. i have to finish my space now... so i may actually copy some of your ideas!
looking good gorbygould. i have to finish my space now... so i may actually copy some of your ideas!
9 August 2019, 20:26
gorby
Thanks Spanjaard. I'm making minor improvements to the set up as I use the space, but it's much more ergonomically laid out. I also raised the worktop level so that I'm not bending over as much as I used to, and that's much better for my back. Just make sure you have plenty of storage when you do yours. I've filled all the drawers and have still got stuff that needs a home.
The magnetic, under-shelf tool storage works very well so I'd recommend that.
Thanks Spanjaard. I'm making minor improvements to the set up as I use the space, but it's much more ergonomically laid out. I also raised the worktop level so that I'm not bending over as much as I used to, and that's much better for my back. Just make sure you have plenty of storage when you do yours. I've filled all the drawers and have still got stuff that needs a home.
The magnetic, under-shelf tool storage works very well so I'd recommend that.
10 August 2019, 09:06
Gordon Sørensen
Great looking work area, gorby! If only mine was as neat and organized...
Great looking work area, gorby! If only mine was as neat and organized...
10 August 2019, 09:45
gorby
Thanks mates.
That's a good name for the room Urban, although I'm not sure I would be classed as entirely sane.
Gordon: I wish mine was that neat and organised as well! The photos are before any plastic was mangled. I've added another photo on the end to give a more accurate image of what's it's like in use.
Thanks mates.
That's a good name for the room Urban, although I'm not sure I would be classed as entirely sane.
Gordon: I wish mine was that neat and organised as well! The photos are before any plastic was mangled. I've added another photo on the end to give a more accurate image of what's it's like in use.
10 August 2019, 10:24
Urban Gardini
Well, of course you're not able to classify as sane. You're after all a modeller...
Well, of course you're not able to classify as sane. You're after all a modeller...
10 August 2019, 10:45
gorby
😄 (I assume that is supposed to represent laughing – it looks more like constipation to me).
Spanjaard: The ducting was one of my slightly better ideas. It doesn't get rid of the paint smells completely, but it's much better than it was. Incidentally the stuff I used is called 'Kair System 100 Rectangular'. I bought it from a well known South American river😉 and it was quite a reasonable price - £37 all in. The brackets are overpriced but I managed to do it with just one of them.
😄 (I assume that is supposed to represent laughing – it looks more like constipation to me).
Spanjaard: The ducting was one of my slightly better ideas. It doesn't get rid of the paint smells completely, but it's much better than it was. Incidentally the stuff I used is called 'Kair System 100 Rectangular'. I bought it from a well known South American river😉 and it was quite a reasonable price - £37 all in. The brackets are overpriced but I managed to do it with just one of them.
10 August 2019, 11:10
Alec K
Very nice job Gorby, and considering your self-reported aversion to labor a laudable effort indeed. I envy the natural light (my cave is in the basement, so no cigar). Nice work on the tool storage and compressor mounting as well 👍
Very nice job Gorby, and considering your self-reported aversion to labor a laudable effort indeed. I envy the natural light (my cave is in the basement, so no cigar). Nice work on the tool storage and compressor mounting as well 👍
10 August 2019, 12:41
gorby
Thanks Alec. I had hoped those years of manual labour were behind me, it's not good for your health you know. The compressor mounting works well – the rubber shelf mounting and the rubber mat absorb quite a lot of the vibration, so it sounds much quieter.
Thanks Alec. I had hoped those years of manual labour were behind me, it's not good for your health you know. The compressor mounting works well – the rubber shelf mounting and the rubber mat absorb quite a lot of the vibration, so it sounds much quieter.
10 August 2019, 16:27
Spanjaard
i actually have part of the stuff already... i had a couple of tubes leftover from some crazy idea during the renovation of our place... i just need the ends of it, and i have it almost done. well, i need to connect it to the window, but i have an idea about it 🙂
i actually have part of the stuff already... i had a couple of tubes leftover from some crazy idea during the renovation of our place... i just need the ends of it, and i have it almost done. well, i need to connect it to the window, but i have an idea about it 🙂
10 August 2019, 20:45
Kesa Tiho
Wow, cool to see the cave where all the magic happenes. Also interested to see what the mouse looking build on your desk is (you might have posted about it already but i havent checked your profile so gonna go do that now 👍)
Wow, cool to see the cave where all the magic happenes. Also interested to see what the mouse looking build on your desk is (you might have posted about it already but i havent checked your profile so gonna go do that now 👍)
14 October, 13:04
gorby
Thanks all. 🙂
Kesa, that was my SHADO 1 build: Where have all the Aliens gone? Scratching my SHADO. | Album by gorby (1:48)
Thanks all. 🙂
Kesa, that was my SHADO 1 build: Where have all the Aliens gone? Scratching my SHADO. | Album by gorby (1:48)
14 October, 13:31
Mr D
Set up looking 👍👍 will make a pleasant place to work.
I noticed you have to water trap on your airbrush..... Would you recommend l use my one for spraying Tamiya paints ??
I've just used straight air pipe up to now on my water base acrylics ... mainly Velejo.
Set up looking 👍👍 will make a pleasant place to work.
I noticed you have to water trap on your airbrush..... Would you recommend l use my one for spraying Tamiya paints ??
I've just used straight air pipe up to now on my water base acrylics ... mainly Velejo.
14 October, 17:00
gorby
Thanks mates. 🙂
Mr. D, it's a bit odd....when I don't use the trap I have problems with the airbrush, but the trap appears to have never trapped any water. My advice would be - if you don't have any problems, don't change what you're doing.
Thanks mates. 🙂
Mr. D, it's a bit odd....when I don't use the trap I have problems with the airbrush, but the trap appears to have never trapped any water. My advice would be - if you don't have any problems, don't change what you're doing.
14 October, 17:08
Mr D
Ok.. thanks 👍
Sometimes l get clogging up with clear, but generally it's ok, l have a Iwata clone airbrush and it's quite reliable most the time.
Think l will have to get better compressor with tank at some point.
Cheers 👍
Ok.. thanks 👍
Sometimes l get clogging up with clear, but generally it's ok, l have a Iwata clone airbrush and it's quite reliable most the time.
Think l will have to get better compressor with tank at some point.
Cheers 👍
14 October, 19:46
S B
That is a perfectly organized and well laid out workspace. Nice to see such „projects" here, too! Thanks for sharing! 👍
That is a perfectly organized and well laid out workspace. Nice to see such „projects" here, too! Thanks for sharing! 👍
15 October, 07:40
gorby
Thanks S B. It does work well for me so it was worth all the planning and the work. five years on it's significantly less tidy though. 😳
Thanks S B. It does work well for me so it was worth all the planning and the work. five years on it's significantly less tidy though. 😳
15 October, 07:46
S B
Oh yes, I see now that your post is from 2019! 😂 But believe me it doesn't need 5 years. I reorganized my workspace in April (this year) and it's already looking pretty messy again! 😂😂🙈
Oh yes, I see now that your post is from 2019! 😂 But believe me it doesn't need 5 years. I reorganized my workspace in April (this year) and it's already looking pretty messy again! 😂😂🙈
15 October, 07:50
Alejandro Vucko
pridal nový fotoalbum.
pridal nový fotoalbum.
56 snímky
IA-58A Pucara "In Foreign Service"Nový: 14 October, 22:06 1:72
projekt: IA-58A Pucara "In Foreign Service"
10 6 October, 18:57
Alejandro Vucko
Que bueno... me encantaría verlo ¡¡No olvides ponerle peso en la nariz!!
Que bueno... me encantaría verlo ¡¡No olvides ponerle peso en la nariz!!
14 October, 23:26
Mike Blackwell@SCM Data suggestions
For some reason, the Heller, Lodela, Blue Ribbon and Revell timelines of the 1/450 Boeing 747 aren't connected to each other on their individual pages, even though the "Manage Timeline" areas confirm that they're linked. The only places that hint at their being the same tooling are the master timelines for that subject and scale:
Boeing 747 (Heller 037, 1:450)
Boeing 747 (Heller 037, 1:450)
Implementovaná
2 13 October, 03:22
Kalle Kindel
pridal nový fotoalbum.
pridal nový fotoalbum.
9 14 October, 21:06
Alexander Grivonev
Wow, never seen Estonian markings. So cool 👍 black/white/blue is a nice combo
Wow, never seen Estonian markings. So cool 👍 black/white/blue is a nice combo
14 October, 21:22
Vlad Medvedovskiy
začal túto položku
začal túto položku
Photo-Etched Parts for Russian cruiser Kirov-class ex. White Ensign Models
Pit-Road 1:700
PE751 2017 Nové pole 15 October, 07:35
Dominik Weitzer
pridal nový projekt.
pridal nový projekt.
1 6 October, 10:10
Bill Newcomer
I have this kit from way back. I am waiting for my skillset to get better to tackle it.
I have this kit from way back. I am waiting for my skillset to get better to tackle it.
12 October, 02:37
Dominik Weitzer
Oh Yes Bill...i am not a truck builder, but i thought, my skills are good enough to fight it. That was a hard way, to complete that kit.
Because i remembered the Truck from my childhood on a poster in my room, it was a wish, to build it till the end.
I will load up pictures asap. It is ready...without decals.
Oh Yes Bill...i am not a truck builder, but i thought, my skills are good enough to fight it. That was a hard way, to complete that kit.
Because i remembered the Truck from my childhood on a poster in my room, it was a wish, to build it till the end.
I will load up pictures asap. It is ready...without decals.
15 October, 07:33
/sk/search.php?q=*&page=newsfeed&fkSECTION[]=Newsfeed
search-solr.php?lang=sk
35
35
/sk/search.php?q=*&page=newsfeed&fkSECTION[]=Newsfeed
35
todo