F/A-18A+/B/CF-188
Kinetic | No. K48030 | 1:48
Чињенице
- Бренд:
- Kinetic
- Наслов:
- F/A-18A+/B/CF-188
- Број:
- K48030
- Размера:
- 1:48
- Тип:
- Целовита макета
- Издато:
- 2016 Нови делови
- Бар код:
- 9588838161038 (EAN)
- Паковање:
- Чврста кутија (са поклопцем)
- Тематика:
- McDonnell Douglas F-18 Hornet » Млазњаци (Летелице)
Ознаке
McDonnell Douglas F-18 Hornet
McDonnell Douglas CF-188A Hornet
Royal Canadian Air Force - Aviation royale canadienne (2011-now)
- 409 Sqn. Nighthawk
Јун 2016
Medium grey over Ghost grey - 410 Sqn. Cougars
Јун 2016
Medium grey over Ghost grey - 425 Sqn. Alouette
Април 2015
Medium grey over Ghost grey
McDonnell Douglas CF-188B Hornet
Royal Canadian Air Force - Aviation royale canadienne (2011-now)
- 410 Sqn. Cougars
Јун 2016
Medium grey over Ghost grey - 425 Sqn. Alouette
2015
Medium grey over Ghost grey
McDonnell Douglas EF-18A Hornet
Ejército del Aire (Spanish Air Force 1939-now)
- 12 Ala De Caza
2016
Ghost grey - 15 Ala de Caza
2015 Anatolian Eagle - Konya
Ghost grey
McDonnell Douglas F/A-18A Hornet
Royal Australian Air Force (1921-now)
- No. 3 Sqn. A21-57
2015 Operation OKRA - Persian Gulf
Medium grey over Ghost grey - No. 75 Sqn. A21-35
Април 2015 Australian International Airshow - Avalon, VIC
Medium grey over Ghost grey - No. 77 Sqn. A21-4
2014
Medium grey over Ghost grey
McDonnell Douglas F/A-18A+ Hornet
Ejército del Aire (Spanish Air Force 1939-now)
- 46 Ala De Caza
2016
Ghost grey
Садржај кутије
Пластична смрека (Clear), Пластична смрека, Пхотоетцхед фрет, Децалсхеет (водени тобоган)
Величине:
466x298x85 mm
(18.3x11.7x3.3 inch)
Бокарт дизајнирао Vincenzo Auletta
Временски оквир производа
Kinetic
Нови алат
Нови делови
Нови декали/налепнице
Нови делови
Нови делови
Нови делови
Нови декали/налепнице
Нова кутија
Реиздата кутија
Нови декали/налепнице
Нови декали/налепнице
Нови делови
Нови декали/налепницеУпутства
Преузимање 6925Kb (.pdf)
Тржиште
Интернет продавнице
USD 63.59
На лагеру »
USD 67.49
На лагеру »
USD 90.58
На лагеру »
USD 69.16
Расположиво »
CHF 54.25
USD 63.50На лагеру »
€ 55.89
USD 63.30На лагеру »Прикажи све понуде » (15 укупно)
Приватна трговина и размена
Алтернативни СКУ-ови за Kinetic K48030:
030 | KN48030 | KIN48030 | 48030
Белешка: Цене и доступност су само информационог типа. Такође проверити да ли се производ подудара!
Сродни производи
Kelik 1:48
Сви повезани производи » (270 укупно)
In-box рецензије
Екстерне рецензије
Реклама
Преглед у кутији
Cybermodeler
Преглед у кутији
IPMS Deutschland
Преглед у кутији
Hyperscale
Преглед
DN Models
Све рецензије » (10 укупно)
Часописи
Сви часописи » (9 укупно)
Пројекти
1 слике
Cold Lake Cougar: 1/48th Kinetic CF-188A/B (F/A-18A/B) Hornet
1:48
See completed model at: https://www.flypastrush.com/post/cold-lake-cougar-1-48th-kinetic-cf-188b-hornet
Пројекат: F/A-18A+/B/CF-188
Галерија
Сви чланци » (14 укупно)
Коментари
Ron GarciaSecond build of this kit. I still had trouble with the refueling probe section. Not as bad this time. It just sits funny in the cockpit half. I won't make another, but if I did, I'd add part H6 after I constructed the forward fuselage so I could make adjustments to make it sit more flush in the closed position.
I didn't have as much trouble with the cockpit shroud the second time around either. I think the issue the first time was caused by the engineering of the upper fuselage itself. Because of the cut out for the aerial refueling probe, the starboard side doesn't have much plastic attaching to the rest of the fuselage. The plastic that is there is the lip where the cockpit shroud sits. I accidentally broke that the first time so it could have rode high after I repaired it. As it was, I nearly broke it again due to the finicky fit due to - you guessed it - the aerial refueling subassembly. The forward canopy still rode high and required sanding to blend it into the forward cockpit section.
29 March 2022, 00:08
Ron GarciaHaving finished several Hasegawa F-18s, I was interested how this kit would measure up. I thought it was easier to build than Hasegawa's. The flaps and ailerons are easier to install by far. Overall the fit was the parts was great - except for two things that caused me a serious headache!
The first was the aerial refueling probe. Just two pieces if you want it closed like I chose, three if not. The subassembly is added to the nose section, but the instructions aren't very clear how to do this. I figured it out but it sat too deep in the front cockpit. I played with it over and over and even reattached it several times but I was never able to get it to fit flush with the nose section. I ended up puttying it over and rescribed the panel outline. I don't know what I did wrong but I spent WAY too much time on a two piece subassembly.
The second major problem I had was with the cockpit shroud C25 of all things. There are three notches for it to fit into the top fuselage section so I placed it exactly where it was supposed to go. However, when I tried to add the forward canopy, the shroud interfered with it. The shroud sits too high so it forces the front canopy up a few mm instead of a smooth tradition into the fuselage. Again, I played with it over and over, but I couldn't get it to sit correctly. I ended up having to carefully carve the excess clear plastic in the front portion of the forward canopy where the canopy frame is and then add putty to the front of the fuselage to make a smooth transition. Again, I'm can't figure out what happened.
Aside from those two major problems, I liked the kit. I have a second one I'm going to put together next. That will let me see if those issues were bad luck, the kit or user error. I reserve judgement until I build the next one.
1 3 March 2022, 02:49
Референтни материјал
Све књиге » (64 укупно) Сви унаоколни прегледи » (45 укупно)