Soviet 2A3 Kondensator 2P 406 mm Self-propelled Howitzer
Trumpeter | No. 09529 | 1:35
Gerçekler
- Marka:
- Trumpeter
- Başlık:
- Soviet 2A3 Kondensator 2P 406 mm Self-propelled Howitzer
- Numara:
- 09529
- ölçek:
- 1:35
- tip:
- Tam kiti
- Yayınlandı:
- 2018 Yeni araç
- Barkod:
- 9580208095295 (EAN)
- paketleme:
- Sert kutu (Üst açıcı)
- konu:
- 2A3 Kondensator 2P » Kendinden tahrikli topçu (Araçlar)
Kutu içeriği
Plastik ladin, Fotoetrik perde, Decalsheet (su kaydırağı)
boyutlar:
450x290x90 mm
(17.7x11.4x3.5 inch)
Ağırlık:
1046 g (2.31 lbs)
tarafından tasarlanan Boxart Vincent Wai
Ürün zaman çizelgesi
Trumpeter
2018
Yeni araçTalimatlar
İndir 2297Kb (.pdf)
Pazaryeri
Çevrimiçi mağazalar
USD 90.30
Stokta var »
USD 114.39
Stokta var »
USD 122.36
Stokta var »
USD 137.99
Stokta var »
USD 78.33
Mevcut »
AUD 142.51
USD 100.28Stokta var »Tüm teklifleri göster » (13 toplamda)
Özel ticaret ve takas
için alternatif SKU'lar Trumpeter 09529:
TR09529 | PKTM09529 | TRP9529 | TR 09529 | TRUM09529 | TRU09529
Not: Fiyatlar ve uygunluk sadece göstergedir. Ürünün gerçekten aynı olup olmadığını da kontrol edin!
İlgili ürünler
Kutu içi incelemeler
Dış incelemeler
reklâm
Kutu içi inceleme
IPMS Deutschland
Kutu içi inceleme
Modellversium
Kutu içi inceleme
Armorama
gözden geçirmek Nigel’s Mustang and ModelsTüm incelemeler » (5 toplamda)
Projeler
3 Görüntüler
Trumpeter's Soviet 2A3 Kondensator 2P 406 mm Self-propelled Howitzer
1:35
Re. the cannon barrel, I airbrushed on black matte primer and sanded it off again to get an idea if there were areas wit...
Yorumlar
TreehuggerBtw, I counted the track links. 12 sets of 18, for a total of 216, or 108 on both sides. Build guide states the kit requires 101 track links on each side, so there is apparently 7 spare track links on each side. 🙂
The tracks are not moving and have to be glued in place. No ejection pin marks what so ever. There are four stubs for each track link that has to be cleaned up.
6 September 2021, 09:51
Aleksandr KharkovThis model must by 570 mm long. Have anyone enough free space for it? Heh
12 March 2018, 11:06
THE BEASTYou're wrong. This is length of 2B1 "Oka" (made same time as Kondesator) copied on most sites. Just compare photos.
28 August 2018, 15:40
Rexhmm, 20+ inches long for that model would seem just about right, Aleksandr. You and I both see about 8 or more inches for the vehicle, plus about a foot for the barrel.
28 August 2018, 16:08
THE BEASTNo. Diameter of road wheel is 550mm. So you can easily calculate length from photos: about 13-14 meters. So model will be about 400 mm length.
29 August 2018, 15:05
Rex"43 cm" is on the box, according to the review posted on Scalemates. So, yeah, wayyyy smaller than Aleksandr's joke,,,,,,,geez. (but, 3 cm longer than the "correcting Beast" )
29 August 2018, 15:26
