Стіна
Wall
June 16, 2024
Jon Bryon
додав новий фотоальбом.
додав новий фотоальбом.
All comments (5) » 15 15 June, 10:45
Jon Bryon
Thanks Thomas and Curatorm. The build was okay. The fit is generally fine (except for the intakes in my case) but the moulding is not brilliant in lots of places. I had to rescribe all the panel lines as lots of the them were too shallow.
Thanks Thomas and Curatorm. The build was okay. The fit is generally fine (except for the intakes in my case) but the moulding is not brilliant in lots of places. I had to rescribe all the panel lines as lots of the them were too shallow.
16 June, 18:44
June 15, 2024
May 18, 2024
Jon Bryon
додав новий фотоальбом.
додав новий фотоальбом.
All comments (21) » 39 6 April 2022, 13:21
Phenix Outis
@Jon, I will let you know, it shouldn't be long as I just finished painting stage. Now, weathering 🙂. Oh, btw, I opted for the same markings as yours, the most interesting imo.
@Jon, I will let you know, it shouldn't be long as I just finished painting stage. Now, weathering 🙂. Oh, btw, I opted for the same markings as yours, the most interesting imo.
17 May, 21:13
May 1, 2024
Jon Bryon
додав новий фотоальбом.
додав новий фотоальбом.
14 1 May, 10:29
Jon Bryon
додав новий фотоальбом.
додав новий фотоальбом.
2 1 May, 09:58
April 17, 2024
Jon Bryon
додав новий фотоальбом.
додав новий фотоальбом.
All comments (10) » 16 30 September 2019, 12:53
Neuling
Perfect! Very clean, detailed and realistic looking build. It´s a joy to watch it.
Perfect! Very clean, detailed and realistic looking build. It´s a joy to watch it.
30 September 2019, 17:48
March 27, 2024
March 26, 2024
Jon Bryon
додав новий фотоальбом.
додав новий фотоальбом.
12 26 March, 11:41
March 25, 2024
Jon Bryon
додав новий фотоальбом.
додав новий фотоальбом.
15 25 March, 16:32
Treehugger
Usure if you already finished, but the bend probe pole can probably be straightened, by holding the resin part vertically in near boiling hot water for half a minute or more. Then it should straighten itself out, the thicker the resin the more diffucult it is to change the resin I suspect, unsure. I only did that with Eduard's Brassin 1:48 Sidewinder missiles in resin, and it worked.
Usure if you already finished, but the bend probe pole can probably be straightened, by holding the resin part vertically in near boiling hot water for half a minute or more. Then it should straighten itself out, the thicker the resin the more diffucult it is to change the resin I suspect, unsure. I only did that with Eduard's Brassin 1:48 Sidewinder missiles in resin, and it worked.
25 March, 16:46
Jon Bryon
Thanks - the model is finished and the probe was straightened as you suggest. Finished photos should be done tomorrow.
Thanks - the model is finished and the probe was straightened as you suggest. Finished photos should be done tomorrow.
25 March, 17:55
Jon Bryon
завершив цей предмет
завершив цей предмет
Rotor CH-53 Super Stallion/MH-53E Sea Dragon (7 blades, 3 engines) for Academy
ResKit 1:48
RSU48-0021 25 March, 16:18
Jon Bryon
завершив цей предмет
завершив цей предмет
Tail rotor for СH-53E Super Stallion/MH-53E Sea Dragon
ResKit 1:48
RSU48-0037 25 March, 16:18
March 14, 2024
March 6, 2024
February 15, 2024
Jon Bryon
додав новий фотоальбом.
додав новий фотоальбом.
All comments (21) » 52 18 February 2022, 13:34
February 1, 2024
Jon Bryon
додав новий фотоальбом.
додав новий фотоальбом.
All comments (6) » 11 30 May 2019, 02:00
Jon Bryon
They were from Archer Fine Transfers. I've started using the Eduard ones instead. They are better.
They were from Archer Fine Transfers. I've started using the Eduard ones instead. They are better.
1 February, 21:52
January 27, 2024
January 24, 2024
January 8, 2024
January 5, 2024
Jon Bryon
додав новий фотоальбом.
додав новий фотоальбом.
All comments (5) » 27 10 December 2022, 14:05
December 23, 2023
December 21, 2023
December 15, 2023
December 5, 2023
November 21, 2023
Jon Bryon
додав новий фотоальбом.
додав новий фотоальбом.
All comments (7) » 35 26 February 2023, 14:36
November 12, 2023
Jon Bryon
володіє цим предметом
володіє цим предметом
double-sided mask
Bell AH-1G for Special Hobby ASK (Art Scale Kit) 1:48
200-M48056 2022 Нова прес-форма 12 November 2023, 20:36
Jon Bryon
володіє цим предметом
володіє цим предметом
Conversion Set
Supermarine Spitfire PRXI Over India Post WW2Alley Cat 1:48
ACM48073C 2023 Нова прес-форма 12 November 2023, 20:26
November 10, 2023
October 25, 2023
October 20, 2023
October 19, 2023
Jon Bryon
розпочав цей предмет
розпочав цей предмет
HMM-264 (Rein) Black Knights USMC AV-8B NA, AV-8B+, CH-46E, & CH-53E on USS Bataan
AOA decals 1:48
48-016 2020 Нова прес-форма Багато тем (3)19 October 2023, 20:36
Jon Bryon
розпочав цей предмет
розпочав цей предмет
Rotor CH-53 Super Stallion/MH-53E Sea Dragon (7 blades, 3 engines) for Academy
ResKit 1:48
RSU48-0021 19 October 2023, 20:35
Jon Bryon
розпочав цей предмет
розпочав цей предмет
Tail rotor for СH-53E Super Stallion/MH-53E Sea Dragon
ResKit 1:48
RSU48-0037 19 October 2023, 20:35
October 18, 2023
Jon Bryon
завершив цей предмет
завершив цей предмет
French AF D.520, MS.500, NC.900, DH-82, Ki-43
PT-Decal 1:48
PT4802 2010 Нова прес-форма Багато тем (5)18 October 2023, 15:45
September 24, 2023
Jon Bryon
додав новий фотоальбом.
додав новий фотоальбом.
12 18 September 2023, 17:42
tyu
Nice set. I noticed something odd: in picture 64 the word jet on the intake triangle is upside down. Maybe still fixable?
Edit: nevermind, I see you fixed it judging by the photo's in your other post.
Nice set. I noticed something odd: in picture 64 the word jet on the intake triangle is upside down. Maybe still fixable?
Edit: nevermind, I see you fixed it judging by the photo's in your other post.
24 September 2023, 07:23
Jon Bryon
Yep, this is just a photo dump I'm afraid with no commentary. The decal is wrong and was fixed with a spare from the sheet.
Yep, this is just a photo dump I'm afraid with no commentary. The decal is wrong and was fixed with a spare from the sheet.
24 September 2023, 07:36
Jon Bryon
додав новий фотоальбом.
додав новий фотоальбом.
All comments (15) » 68 18 September 2023, 17:44
Andreas Lux
Hello Jon, you have created a real masterpiece here! The paintwork is top notch! You took great photos too - I really like them!
Hello Jon, you have created a real masterpiece here! The paintwork is top notch! You took great photos too - I really like them!
21 September 2023, 15:41
September 22, 2023
September 16, 2023
Jon Bryon
розпочав цей предмет
розпочав цей предмет
French AF D.520, MS.500, NC.900, DH-82, Ki-43
PT-Decal 1:48
PT4802 2010 Нова прес-форма Багато тем (5)16 September 2023, 06:02
September 15, 2023
September 14, 2023
Jon Bryon
володіє цим предметом
володіє цим предметом
F-111 Aardvark - Triple Plow II Seamless Intakes for HobbyBoss
BAM Models 1:48
BAM48082 2023 Нова прес-форма 14 September 2023, 11:08
September 9, 2023
September 8, 2023
September 6, 2023
August 31, 2023
August 19, 2023
wnolder.php?lang=uk
2023-08-19 08:25:13
2011-05-09 05:18:19
10346
/ajax/wnolder.php?lang=uk&sd=2023-08-19 08:25:13&md=2011-05-09 05:18:19&filter=&w=10346
todo