Mi-8MT/Mi-17 Hip-H
HobbyBoss | No. 87208 | 1:72
Fapte
- Marca:
- HobbyBoss
- Titlu:
- Mi-8MT/Mi-17 Hip-H
- Număr:
- 87208
- Scară:
- 1:72
- Tip:
- Kit complet
- Eliberată:
- 2008 Piese noi
- Cod de bare:
- 6939319272089 (EAN)
- ambalare:
- Casetă rigidă (deschizător de vârf)
- Subiect:
- Mil Mi-8 Hip » Elicoptere (avioane)
Marcajele
Mil Mi-8 Hip
Mil Mi-17 Hip-H
Vzdušné síly Armády České republiky (Czech Air Force 1993-now)
- 0826
القوات الجوية العراقية (Iraqi Air Force 1958-now)
- 4435
Mil Mi-171 Hip-H
中国人民解放军 陆军航空兵(PLA Army Aviation Corps)
- 陆航2旅, 2 Brig. LH92734 (邱光华)
Mai 2008 - Wenchuan
Conținutul cutiei
Sprue din plastic, Sprue din plastic (Clear), Fișă de calcul (alunecare de apă)
Dimensiuni:
320x240x50 mm
(12.6x9.4x2 inch)
Cronologie produs
HobbyBoss
Ark Models
IBG Models
Instrucțiuni
Descarca 2533Kb (.pdf)
Piata de desfacere
Magazine online
USD 18.83
In stoc »USD 23.49
In stoc »USD 26.00
In stoc »USD 27.99
In stoc »USD 17.08
Disponibil »€ 16.31
USD 18.47In stoc »Afișați toate ofertele » (11 in total)
SKU-uri alternative pentru HobbyBoss 87208:
HBS87208 | HB87208 | HBB87208
Notă: Prețurile și disponibilitatea sunt numai indicații. De asemenea, verificați dacă produsul se potrivește cu adevărat!
Produse asemanatoare
Mi-8 Hip - Cockpit coloured PE-detail set HobbyBoss 87208, 87221; Ark Models 72037
Microdesign 1:72
MD 072001 2020 Instrumentul nou Mi-8 Hip - Exterior PE-detail set Zvezda 7230, 7253; HobbyBoss 87208, 87221; Ark Models 72037
Microdesign 1:72
MD 072248 2019 Instrumentul nou Mi-8 Hip - Cockpit PE-detail set HobbyBoss 87208, 87221; Ark Models 72037
Microdesign 1:72
MD 072249 2019 Instrumentul nou Mi-8T / Mi-8MT / Mi-17 / Mi-8MTV-2 - masks for windows; disks and wheels for HobbyBoss 87208, 87221; Ark Models 72037
KV Models 1:72
72209 201x Instrumentul nou Toate produsele conexe » (154 in total)
In-box recenzii
Recenzii externe
Publicitate
Revizuire Александр -Всё о хобби
Toate recenziile » (4 in total)
reviste
proiecte
20 imagini
Turkish Gendarmerie's Kazan Mi-17-1V - Hobby Boss 1:721:72
Proiect: TJGK Kazan Mi-17V1 - Hobby Boss 1:72
Galerie
Toate articolele » (15 in total)
Comentarii
JDenmark
This kit is underway for me, I am just about to start painting it. Some initial thoughts.
Kit is overall pretty average, much to be desired for the detail-oriented but a good kit nonetheless. It's nice to see many schematics available to build future kits from different countries, different production models, etc. I am building mine to be the Chinese Mi-171 per the three options given by Hobby Boss.
Here's where I've spent most of the time so far on this kit:
-sink holes in crew and rear cabin are VERY frustrating. Some occur on a curve in the plastic, making it very tough to fill and then re-sand. Others occur in between raised panels such as in the ceiling. These sections of panels are only 2-3cm x 2-3cm equidistant, so these are even more difficult to patch and sand. I opted to do my best but leave the cabins closed, as there isn't much to show off without aftermarket PE, which I am not using.
-instruments are crude and need reworking, same with seats. Everything in the cockpit needs work and has poor details.
-poor execution of side and rear cabin window mounts. Hobby Boss has made the windows so that they are glued in from the inside, which of course means that there is a huge area that sticks out which serves as the contact portion to glue onto the doors and walls. The windows are NOT flush fit and leave much to be desired.
-fuel tanks needed extra work to achieve continuous lines
-engine and air intake areas needed much sanding and filling, worst fit of anything so far on this model
-wheels must be sanded down and completely re-scribed
-exterior detail is molded into the half shells along seam lines, you end up filing these off. I wish Hobby Boss would have just made these details on the sprue sheet to glue on after you are done fitting the two shells
Rating: 3.8/5
This kit is underway for me, I am just about to start painting it. Some initial thoughts.
Kit is overall pretty average, much to be desired for the detail-oriented but a good kit nonetheless. It's nice to see many schematics available to build future kits from different countries, different production models, etc. I am building mine to be the Chinese Mi-171 per the three options given by Hobby Boss.
Here's where I've spent most of the time so far on this kit:
-sink holes in crew and rear cabin are VERY frustrating. Some occur on a curve in the plastic, making it very tough to fill and then re-sand. Others occur in between raised panels such as in the ceiling. These sections of panels are only 2-3cm x 2-3cm equidistant, so these are even more difficult to patch and sand. I opted to do my best but leave the cabins closed, as there isn't much to show off without aftermarket PE, which I am not using.
-instruments are crude and need reworking, same with seats. Everything in the cockpit needs work and has poor details.
-poor execution of side and rear cabin window mounts. Hobby Boss has made the windows so that they are glued in from the inside, which of course means that there is a huge area that sticks out which serves as the contact portion to glue onto the doors and walls. The windows are NOT flush fit and leave much to be desired.
-fuel tanks needed extra work to achieve continuous lines
-engine and air intake areas needed much sanding and filling, worst fit of anything so far on this model
-wheels must be sanded down and completely re-scribed
-exterior detail is molded into the half shells along seam lines, you end up filing these off. I wish Hobby Boss would have just made these details on the sprue sheet to glue on after you are done fitting the two shells
Rating: 3.8/5
7 May 2016, 16:56
Material de referinta
Early Hips In Detail Mi-17 / Mi-8MT First 20 years of service
In Detail No. B020
František Kořán, Petr Soukop, Lukáš Syrový, J...
2021 Toate cărțile » (13 in total) Toate miscarile » (36 in total)