WWII German 12.8cm Flak 40 Zwilling
Takom | No. 2023 | 1:35
Fapte
- Marca:
- Takom
- Titlu:
- WWII German 12.8cm Flak 40 Zwilling
- Număr:
- 2023
- Scară:
- 1:35
- Tip:
- Kit complet
- Eliberată:
- 2015 Instrumentul nou
- Cod de bare:
- 4897051420293 (EAN)
- ambalare:
- Casetă rigidă (deschizător de vârf)
- Subiect:
- 12.8 cm FlaK 40 » Tunuri (Pistole)
Marcajele
12.8 cm FlaK 40
12.8 cm FlaK-Zwilling 40
Wehrmacht Luftwaffe (German Air Force 1935-1945)
- 1 FlaK-Div. Berlin C
1945 World War 2 - G-Tower, Cesar Gun Position, Tiergarten, Berlin
RAL7021 Dunkelgrau - 24 FlaK Div. Wien
1945 World War 2 - G-Tower, Anton Gun Position, Stiftskaserne, Vienna
RAL7021 Dunkelgrau RAL7028 Dunkelgelb - Unknown Unit C
1945 World War 2 - G-Tower, Cesar Gun Position, Heiligengeistfeld, Hamburg
RAL7021 Dunkelgrau or RAL6003 Olivgrün
Conținutul cutiei
Sprue din plastic, Fret fotografiat, Fișă de calcul (alunecare de apă), vinilin
Cronologie produs
Takom
2015
Instrumentul nouInstrucțiuni
Descarca 7880Kb (.pdf)
Piata de desfacere
Magazine online
USD 93.59
In stoc »
USD 74.99
Disponibil »
USD 53.19
Stoc epuizat »
USD 60.99
Stoc epuizat »
USD 73.76
Stoc epuizat »
CAD 105.00
USD 81.06Stoc epuizat »
€ 51.63
USD 59.76Stoc epuizat »
€ 53.90
USD 62.38Stoc epuizat »
€ 54.52
USD 63.10Stoc epuizat »
€ 56.95
USD 65.91Stoc epuizat »
zł 267.01
USD 71.89Stoc epuizat »Comerț privat și schimb
SKU-uri alternative pentru Takom 2023:
TAK-2023 | TAKO2023 | TAK2023 | TAK02023 | TAO2023 | TAKOM2023
Notă: Prețurile și disponibilitatea sunt numai indicații. De asemenea, verificați dacă produsul se potrivește cu adevărat!
Produse asemanatoare
128mm Metal Barrel Shell Kit for Takom 2023 German Flak 40 Zwilling w/ 88mm shells
ChuanYu Model Ship 1:35
CYT096 2022 Instrumentul nou 
German
12.8cm L/61 barrels for FlaK 40 Zwilling Anti-Aircraft Gun fit to Takom Aber 1:35
35L188 (35 L-188) 2016 Instrumentul nou 
Deutsche Sockellafette Display base to show heavy flak or other installation in a fixed position.
Custom-Scale 1:35
DZ001 2017 Instrumentul nou Toate produsele conexe » (12 in total)
In-box recenzii
Recenzii externe
Publicitate
Recenzie în cutie
Panzer Modell
Recenzie în cutie
Armorama
Revizuire
Best Models
Revizuire Der SockelshopToate recenziile » (10 in total)
reviste
Toate revistele » (5 in total)
proiecte
Comentarii
TreehuggerThe build guide is weird in places. One has to look very carefully to notice that this part is supposed to be glued on, on the inside of two larger parts:
I made the mistake of simply gluing two big parts together. One has to be careful, when fixing this, to avoid have the part being lost inside the big part (so hold the big part upside down while gluing on the smaller part).
[img1] (image upload)
23 September 2023, 12:38
TreehuggerSo the kit comes with a large base, and also a smaller part: I took the smaller part, removed some plastic, and build a stand for it using sheet/strip styrene. Unsure how realistic this custom base is, but I was inspired by what other's have done in a similar fashion.
Best to keep the gray plastic part unglued and separated from the white styrene until after you have airbrushed all the inside areas. Then one can glue on the gray part, such that each pair of bolt ends up on the "outside" of the white styrene parts all around. I did NOT use a circle cutter (else I would have ruined the blade I think), just snipped off plastic all around the big white part, and sanded round using a metal file.
The gray plastic base, had its outer ring removed, so that it now looks like two base plates (top&bottom) are connecting, held together with bolts. I used a saw and did NOT cut styrene with a blade, because using a blade to cut styrene into parts looks too ugly/uneven.
[img1] (image upload)
17 September 2023, 11:41
TreehuggerThis review has info on adding missing details: archive.armorama.com/review/12115/
Best be careful when gluing things together, because the moulds are weird. Not just flash here and there, but misalinged moulding in places. Not entirely terrible, but an unexected annoyance in some places like the breech block.
Btw, the aftermarket metal barrels fits the plastic nicely. No idea if some counter weight is ideally needed or not, haven't gotten that far yet.
Tip, for adding styrene bolts, without fiddling to much, best just glue on a piece of rod (then let the plastic harden), then snip it, and very gently sand flat so it looks like a bolt. Having said that, there are aftermarket bolt with hex shape in resin that would be nice, if you can get the precise size needed, not too small, nor, too large.
7 September 2023, 16:45
Warren InmanDoes anyone know why kit number 2023 (12.8cm Flak Zwilling) is missing from the Takom website? Any conspiracy theories out there? 🙂
18 December 2019, 20:36
